AMX NXD-CV12 Technical Information download pdf (Page 198)

External Controls (Buttons/LEDs)

164

TPDesign4 (v3.2 or higher)

Name

Disabled

Setting Global Programming Properties: External LEDs

Global (panel-wide) settings for external LEDs are accessed through the External Controls entry in the

panel’s tree (displayed in the Pages tab of the Workspace Navigator Window).

1. Double-click on the External Buttons entry to display a Design View Window representing the layout of

the external buttons and LEDs on the target panel, which may be selected like any other button to edit

their properties.

2. Use the Selection Tool to pick the LED (or group of LEDs) that you want to configure (in the Design

View Window).

3. Once you have selected an LED, you can use the Programming tab of the Properties window to set/edit

programming-oriented LED properties. To edit any of the properties in the table, click on an item in the

right-hand column to activate the field. Depending on the item selected, you can either set the item

manually, select from a drop-down menu, or both.

The following programming properties are supported for External LEDs:

Feedback

Address Port

Address Code

Channel Port

Channel Code

Setting Page-Specific Properties for External Controls

TPD4 allows you to set Global or Page-Specific properties for external controls (for projects targeted at panel

types that have external buttons/LEDs).

Global settings are panel-wide settings that apply to the external controls, regardless of the page

currently showing on the panel. See Setting Global Properties for External Pushbuttons for details.

Page-specific properties are external control properties that change according to the specific page

showing on the panel.

Page-specific settings are accessed via each page's Design View. With a page active, select Page > Show

External Controls or click Ctrl + B (see FIG. 227 on page 161).

To override the global property settings for an external control on a specific page:

1. Open a page (in a Design View Window).

2. Select Page > Show External Controls (or click the toolbar button) to display a graphical representation

of the panel around the page indicating the layout of the external controls for the target panel type.

3. Use the selection tool to select an external control for editing (via the

4. General and Programming tabs of the Properties Control Window.

Note that are no State properties to configure for external controls.

Setting Page-Specific General Properties: External Pushbuttons

Page-specific settings for external controls (pushbuttons and associated LEDs) which may override any Global

settings are set via the Design View of the page that you want to associate the external controls with.

1. Double-click on a Page entry (in the Pages tab of the Workspace Navigator Window) to display the

selected page in a Design View Window.

2. Select Pages > Show External Controls to change the Design View to represent the layout of the

external buttons on the target panel.

3. Use the Selection Tool to pick the external control that you want to configure (in the Design View

Window).

4. Once you have selected an external control, you can use the General tab of the Properties window to set/

edit general button properties. To edit any of the properties in the table, click on an item in the right-hand

column to activate the field. Depending on the item selected, you can either set the item manually, select

from a drop-down menu, or both.

The following page-specific, general button properties are supported for external pushbuttons:

1 ... 197 198 199 ... 430

Comments to this Manuals

No comments

AMX NXD-CV12 Technical Information Page 198

Comments to this Manuals

Related products and manuals for TVs & monitors AMX NXD-CV12