Amx MIO R-1 AUDIO FG147-04 User Manual download pdf (Page 11)

Programming The MIO R-1 AUDIO

MIO R-1 AUDIO

Configuration Mode

The configuration mode allows you to set the following device features:

 IR Transmit Mode (38 KHz or 455 KHz)

 Timeout Adjustment

 Download Mode

 Debug Mode

 Battery Type

 LED Awake Brightness

 Sleep Brightness

To enter configuration Mode:

1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1

seconds of each other and held down for 2 seconds. The device indicates you are now in

configuration mode. See below for available modes.

2. Press the EXIT key when you are finished.

Note: Your settings will not be lost in the event your batteries die or are removed.

IR Transmit Mode

Pressing button "1" on the remote toggles the IR transmission mode between 38Khz and 455Khz. The

display indicates the current mode.

Timeout Adjustment

Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the

sleep timeout raises incrementally. The pre-determined sleep time-outs are:

 3 seconds

 6 seconds

 9 seconds

 12 seconds

The display indicates the selected sleep timeout.

Download Mode

Pressing "3" on the remote toggles the Download mode OFF and ON. The Download mode must be ON

before you can download a file to the MIO R-1 AUDIO. While the Download mode is ON the device

will not go to sleep. A power cycle will return the device to Download OFF.

IR Code Matrix (Cont.)

Button Label Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6

41 S. REV Z 7 47 87 127 167 207

42 PLAY A 1 41 81 121 161 201

43 S. FWD Y 6 46 86 126 166 206

44 REW E 5 45 85 125 165 205

45 FWD D 4 44 84 124 164 204

1 ... 10 11 12 ... 30

No comments

Amx MIO R-1 AUDIO FG147-04 User Manual Page 11