Amx MIO R-1 AUDIO FG147-04 User Manual Page 1

Operation/Reference GuideDistributed AudioMIO R-1 AUDIOTango Distributed Audio Remote ControlInitial Release: 2/19/2008

Programming The MIO R-1 AUDIO6 MIO R-1 AUDIOIR Code MatrixThe IR Code emitted depends upon which of the 6 configurable modes is selected. Below is the

Programming The MIO R-1 AUDIO7MIO R-1 AUDIOConfiguration ModeThe configuration mode allows you to set the following device features: IR Transmit Mode

Programming The MIO R-1 AUDIO8 MIO R-1 AUDIODebug ModePressing button "4" on the remote toggles development mode between ON and OFF. The dis

Programming The MIO R-1 AUDIO9MIO R-1 AUDIOUpdating MIO R-1 AUDIO FirmwareUpdating firmware in the MIO R-1 AUDIO is also done through the programming

Programming The MIO R-1 AUDIO10 MIO R-1 AUDIOPersistent Serial CommandsThere are a select number of persistent commands the MIO R-1 AUDIO recognizes.

MIO Remote Charging Base11MIO R-1 AUDIOMIO Remote Charging BaseThe MIO remotes are complemented either with a MIO-RCC charging base (FG147-02) or the

MIO Remote Charging Base12 MIO R-1 AUDIOThe specifications for the MIO remote charging base and kit are as follows: Installing The Rechargeable Batter

MIO Remote Charging Base13MIO R-1 AUDIO5. Remove the back housing.6. Place the new housing on the device so that the rechargeable battery port connect

MIO Remote Charging Base14 MIO R-1 AUDIOChanging Battery ModesConfiguration ModeThe Configuration mode allows you to set the battery type. To enter Co

Using the MIO R-1 AUDIO Remote15MIO R-1 AUDIOUsing the MIO R-1 AUDIO RemoteTone Control & SRS Setting To access the Tone Control and SRS settings,

AMX Limited Warranty and DisclaimerThis Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Part

Using the MIO R-1 AUDIO Remote16MIO R-1 AUDIOPrivacy ModeWhen the privacy feature is engaged, the room/zone cannot be paged, apart from this, the room

Using the MIO R-1 AUDIO Remote17MIO R-1 AUDIOSource Control Internal Tuner and Audio Server CD and DVD Satellite and Other Pressing Source Buttons swi

Using the MIO R-1 AUDIO Remote18MIO R-1 AUDIOCustom XM Direct Numeric Access TunersEnter the station identification and press ENTER. Strings of 3 to

Using the MIO R-1 AUDIO Remote19MIO R-1 AUDIOPresets Creating a Preset1.Select the source.2. Direct Tune to the station of choice (enter station ID +

Using the MIO R-1 AUDIO Remote20MIO R-1 AUDIOZone GroupingIn this state, zones can be "grouped" together and controlled as a single zone. Pr

Using the MIO R-1 AUDIO Remote21MIO R-1 AUDIOFavoritesOne "favorite" can be programmed for each Source, in each Zone.If a "favorite&quo

Using the MIO R-1 AUDIO Remote22MIO R-1 AUDIOAlarmWhen the alarm time is reached, the source selected will turn ON and the volume will ramp up to the

Using the MIO R-1 AUDIO Remote23MIO R-1 AUDIOKeypad Lockout Locking A Specific Keypad1.Press "LOCK" button.2. Enter the room/zone # to lock.

Using the MIO R-1 AUDIO Remote24MIO R-1 AUDIO

Using the MIO R-1 AUDIO Remote25 MIO R-1 AUDIO

Table of ContentsiMIO R-1 AUDIOTable of ContentsOverview ...

2/08 ©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without no

iiMIO R-1 AUDIOTable of ContentsSatellite and Other ...

Overview1MIO R-1 AUDIOOverviewThe MIO R-1 AUDIO (FG147-04) remote provides custom control features, contained in an elegant handheld device, designed

Overview2 MIO R-1 AUDIOSpecificationsThe MIO R-1 AUDIO device specifications are as follows: Touch And Tilt SensorThe MIO R-1 AUDIO wakes up upon touc

MIO R-1 AUDIO Setup3MIO R-1 AUDIOMIO R-1 AUDIO SetupInstalling Your Custom Buttons1. Flip and turn the MIO R-1 AUDIO so that the buttons are facing aw

MIO R-1 AUDIO Setup4 MIO R-1 AUDIOBattery Low IndicatorWhen the battery charge level is too low to sustain continuous operation, the LCD flashes, &quo

Programming The MIO R-1 AUDIO5MIO R-1 AUDIOProgramming The MIO R-1 AUDIOMost functionality of the MIO R-1 AUDIO is handled using the application Keypa