Amx Mio R-1 User Manual download pdf

Quick Start Guide

Mio R-1 Remote Control Device

Overview

The Mio R-1 (FG147) remote provides custom control features, contained in an

elegant handheld device. The Mio R-1 controls 6 different device modes, supports 3

macro functions and is capable of executing 219 functions.

Selecting a source device sends a command to the master and runs predetermined

events associated with that source. Selecting a macro will run predefined events,

which might not be associated with sources listed, then return the device to its

previous mode.

You need KeypadBuilder to properly program this device. The application and

documentation are available from www.amx.com.

Touch And Tilt Sensor

The Mio R-1 wakes up upon touching either the chrome side rails or pressing a button.

When holding the remote and it times out, you can reawaken the device by tilting it.

Errant jostling such as a bumped table will not wake the device unless you are holding

it.

Specifications

The Mio R-1 device specifications are as follows:

Installing Your Custom Buttons

1. Flip and turn the Mio R-1 device so that the buttons are facing away from you

and the device is upside down.

2. Holding the device in both hands, place your thumbs on the battery door and

push up to slide the battery door free.

3. Unscrew the 6 screw points indicated in FIG. 2.

4. Turn the unit over so the buttons are facing you.

5. Lift the top assembly away from the PCB.

6. If necessary, push out the standard buttons from the front of the top assembly.

7. Drop on your custom button pad and verify the alignment with the guide posts on

the PCB.

8. Place the top assembly back down on the PCB and return the unit over, expos-

ing the 6 screw points.

9. Tighten the 6 screw points.

10. Place the battery door back on the device, slide to lock it in place.

Inserting Batteries into The Mio R-1

To install your 4 AAA batteries into the Mio R-1 device:

1. Flip and turn the Mio R-1 device so that the buttons are facing away from you

and the device is upside down.

2. Holding the device in both hands, place your thumbs on the battery door and

slide the battery door free.

3. Insert the batteries as indicated inside the battery compartment.

4. Place the battery door back on the device, slide to lock it in place.

Battery Low Indicator

When the battery charge level is too low to sustain continuous operation, the LCD

flashes, "Battery Low" and the device shuts down.

Programming The Mio R-1 Using KeypadBuilder

Most functionality of the Mio R-1 is handled using the application, KeypadBuilder. Go

to www.amx.com for the KeypadBuilder Instruction Manual.

There are a select number of Serial Commands the Mio R-1 recognizes. For a full list

and descriptions, consult the Mio R-1 Instruction Manual on www.amx.com.

FIG. 1

The Mio R-1 Device

Mio R-1 (FG147) Specifications

Battery 4 AAA Alkaline Batteries (5 hours battery life)

Transmission

Frequencies

AMX 38 KHz/455 KHz IR

Transmission

Range (distance)

with Mio IR Receiver

• 100 feet at 38KHz

• 50 feet at 455KHz

Transmission

Range (angle)

• 140 degrees (+/-70° from perpendicular) horizontally from an axis

extending from the end of the remote.

• 40 degrees (+/-20° from perpendicular) vertically from an axis

extending from the end of the remote.

Top Components • LED - blue backlit buttons indicate device is awake

• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm

• Pushbuttons - the power button is red backlit; the rest are blue backlit

buttons. 45 buttons; 9 custom buttons (3 macro and 6 device).

Rear Component • Programming Port - 2.5 mm stereo female conductor jack

•Battery Door

Dimensions (HWD) 9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)

1 - Power

2 - Guide

3 - Exit

4 - Menu

5 - Information

6 - Move Up

7 - Move Down

8 - Move Left

9 - Move Right

10 - Select

11 - Volume Up

12 - Volume Down

13 - Channel Up

14 - Channel Down

15 - Last Viewed

16 - Mute

26 - Input

28 - Enter

38 - Stop

39 - Record

40 - Pause

41 - Slow Reverse

42 - Play

43 - Slow Forward

44 - Rewind

45 - Forward

Power

IR Transmitting

Current Menu

Battery Meter

Custom Macro

Buttons

Custom Mode

Options

44 45

Numeral Keypad

Mio R-1 (FG147) Specifications (Cont.)

Supported Languages: • English

•French

•German

•Greek

• Italian

• Japanese

•Korean

• Mandarin Chinese

• Portuguese

• Russian

• Spanish

Weight • .45 lbs (20 kg) without batteries

• .55 lbs (25 kg) with batteries

Operating Environment: • Operating Temperature: 0° to 50° C (32° to 122° F)

• Storage Temperature: -10° to 70° C (14° to 158° F)

Other AMX Equipment • DB-9 extension cable (FG10-727)

• Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817)

• Custom engraving (FG147-01)

• Mio-RCC Kit (FG147-03K)

• Mio-RCC Charging Base (FG147-02)

• Mio-RBP Rechargeable Lithium Ion Battery (FG147-10)

• Mio Modero IR Receiver (FG5797-01xx; xx indicates color)

FIG. 2 Internal Mio R-1 Components

6 Screw Points

Programming Jack

1 2

Summary of Contents

Page 1 - Mio R-1 Remote Control Device

Quick Start GuideMio R-1 Remote Control DeviceOverviewThe Mio R-1 (FG147) remote provides custom control features, contained in an elegant handheld de

Page 2 - IR Code Matrix (Cont.)

Comments to this Manuals

No comments

Amx Mio R-1 User Manual

Browse online or download User Manual for Remote control Amx Mio R-1. AMX Mio R-1 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Remote control Amx Mio R-1