Amx Mio Modero R-3 User Manual download pdf (Page 30)

Mio Remote Charging Base

Mio Modero R-3 Remote

Mio-RCC Specifications

The specifications for the Mio remote charging base and kit are as follows:

Charging The Mio Remote with Charging Base

The Mio remotes receive power for charging from a charging base.

1. Connect the terminal end of the power supply to the bottom external power port on the Mio remote

charging base. See FIG. 7 for location.

2. Route the cable through the provided channel so that it comes out the side of the base.

3. Connect the power cord to an external power source.

4. Place the bottom of the Mio remote into the charging base so the contacts on the device are on top of the

charging contacts inside the charging base. The Power LED on the Mio remote blinks red to indicate it is

charging and illuminates solid red when it is done. Full charge cycle for a depleted battery is

approximately 3 hours.

Mio-RCC (FG147-03K) with Base (FG147-02) Specifications

Dimensions (HWD) Charging Base - 1.61 (4.09 cm) (height); 4.25 (10.80 cm) (diameter)

Lithium Ion Battery - 2.13” x 1.38” x .28” (5.41 cm x 3.45 cm x .71 cm)

Weight • 1.15 lbs (.52 kg) - Remote Charging Cradle

• .15 lbs (.07 kg) - Power Supply

• .06 lbs (.027 kg) - Rechargeable Lithium Battery

Other AMX Equipment: • Mio R-1 (FG147)

• Mio R-2 RF 418 (FG147-418)

• Mio R-2 RF 433 (FG147-433)

•Mio R-3 (FG148-23K)

•Mio R-4 (FG148-04)

• NXR-ZGW NetLinx ZigBee Pro Wireless Gateway (FG5791-01)

• NXR-ZRP-PRO NetLinx ZigBee Pro Wireless Repeater (FG5791-03)

• Mio-RBP Rechargeable Lithium Ion Battery (FG147-10)

• AXR-RF 418 MHZ RF Receiver (FG782-418)

• AXR-RF 433 MHZ RF Receiver (FG782-433)

• Mio Modero IR Receiver (FG5797-01xx; xx indicates color)

1 ... 29 30 31 32

No comments

Amx Mio Modero R-3 User Manual Page 30