Amx Mio Modero R-3 User Manual download pdf (Page 13)

Setup Mode

Mio Modero R-3 Remote

ZigBee Extended PAN ID, Channel, and System Connection

Pressing the 9 button will display the current ZigBee Extended Personal Area Network (PAN) ID and channel

for the device. (For more information on ZigBee Personal Area Networks, refer to the NXR-ZGW/-ZRP-PRO

Operation/Reference Guide, available from www.amx.com.) In order to display the NetLinx Master IP and

ZigBee gateway EUI addresses, press the Move Up arrow on the scroll wheel to scroll up. and pressing the

Move Down arrow will scroll down. When finished, press Exit to save the Extended PAN ID and channel

information and leave Setup mode. The display will return to Setup mode 30 seconds after releasing the 9

button.

Network Scan

Pressing the 0 button makes the Mio R-3 scan all frequencies and store all active Extended PAN IDs and

Channels in memory. The display will show the first accessible Extended PAN ID and Channel.

To display other Extended PAN IDs and Channels found in the area, press the Move Up or Move Down

arrows on the scroll wheel until the remote displays the desired Extended PAN ID and Channel.

To connect to a particular Extended PAN ID, pressing the center button on the scroll wheel will initiate the

remote to connect to a network.

If no ZigBee networks were found, the display will read SCAN FAIL before returning to Setup mode. To exit

the Network Scan, press the Exit button.

TeleText Mode

For various reasons, the standard numeric keypad for the Mio R-3 may be bypassed in favor of using the

TeleText mode. This mode allows the central toggle wheel to be used to enter alphanumeric information, such

as passwords, much like the toggle wheel on a phone.

Pressing the Input button puts the central toggle wheel into TeleText mode. Press Input again to leave

TeleText mode.

TeleText button functions

Toggle Wheel up/down Scrolls character up/down

Toggle Wheel left/right Moves cursor left/right between

Last button Backspace (moves cursor back one space and erases previous character)

Exit button Abort (erases previously selected information without entering it)

Enter button Done (submits information)

When upgrading a ZigBee network from ZigBee to ZigBee Pro, the firmware upgrade

necessary for ZigBee Pro will leave the Mio R-3 in a default TeleText mode. This may

be left at any time by pressing the Input button.

1 ... 12 13 14 ... 32

No comments

Amx Mio Modero R-3 User Manual Page 13