Amx Mio Modero R-3 User Manual download pdf (Page 11)

Setup Mode

Mio Modero R-3 Remote

Setup Mode

Overview

The Setup mode allows you to set the following device features on the Mio R-3:

Transmit Mode

Timeout Adjustment

Download Mode

Debug Mode

Firmware Version

Device ID

LED Awake Brightness

LED Sleep Brightness

ZigBee Pan ID, Channel, and System Connection

Network Scan

To enter Setup mode:

1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1

seconds of each other and held down for 2 seconds. The device indicates you are now in Setup mode. The

available modes are listed below.

2. Press the EXIT key when you are finished. The Mio R-3 will automatically exit Setup mode after 30

seconds unless the device is in Download mode.

Transmit Mode

Press button 1 to select from one of the different available transmission modes. The Transmit mode changes

each time 1 is pressed. The predetermined modes are:

IR 38 Khz

IR 455 Khz

ZigBee Mode

IR 38 + ZigBee

IR 455 + ZigBee

The display indicates the selected mode. 30 seconds after selecting the mode, the menu returns to Setup mode.

Timeout Adjustment

Press button 2 on the remote to change the sleep timeout from the default. Each time 2 is pressed, the sleep

timeout raises incrementally. The predetermined sleep timeouts are 3,6,9, and 12 seconds.

The display indicates the selected sleep timeout. 30 seconds after selecting the mode, the menu returns to

Setup mode.

Download Mode

In order to download new firmware or a new configuration or font file to the Mio R-3 remote using the

remote's program port (see Using the Programming Jack on The Mio R-3 section on page 11 for details), the

remote must first be placed into Download mode. Press 3 on the remote to toggle the Download mode OFF

and ON. The Download mode must be ON before you can download a file to the Mio R-3 device. While the

Download mode is ON, the device will not go to sleep. Once the download is complete, this setting must be

returned to Download Off. A firmware download will cause the remote to reset and this will automatically

reset the remote to Download Off.

To leave Download mode, press the EXIT button.

Your settings will not be lost in the event of battery removal or failure.

1 ... 10 11 12 ... 32

Comments to this Manuals

No comments

Amx Mio Modero R-3 User Manual Page 11

Comments to this Manuals

Related products and manuals for Remote control Amx Mio Modero R-3