Amx Mio Modero R-3 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Programming The Mio R-3
15
Mio Modero R-3 Remote
Serial Commands (Cont.)
^FML S/D/L/# ^FML S - Sets a line of the display to a menu line
Syntax:
"'^FML-<variable text address range>,S'"
Variables:
variable text address range = 1; the address range corresponds to the
dynamic line number-only one line is supported on this device.
Example:
SEND_COMMAND Panel,"'^FML-1,S'"
Sets dynamic line to a menu line
^FML D - Sets a line of the display to a dynamic line with no level
Syntax:
"'^FML-<variable text address range>,D'"
Variables:
variable text address range = 1; the address range corresponds to the
dynamic line number-only one line is supported on this device.
Example:
SEND_COMMAND Panel,"'^FML-2,D'"
Set Line 2 to a Dynamic Line with no Level
^FML D L - Sets a line of the display to a dynamic line with a level
Syntax:
"'^FML-<variable text address range>,D,L'"
Variables:
variable text address range = 1; the address range corresponds to the
dynamic line number-only one line is supported on this device.
Example:
SEND_COMMAND Panel,"'^FML-1,D,L'"
Set line 1 to a Dynamic line with level
^FML D L # - Sets a line of the display to a dynamic line with a level, and sets
the level style
Syntax:
"'^FML-<variable text address range>,D,L,<Level Style>'"
Variables:
variable text address range = 1; the address range corresponds to the
dynamic line number-only one line is supported on this device.
Example:
SEND_COMMAND Panel,"'^FML-1,D,L,0'"
Set line 1 to a Dynamic line with level and set style to 'Level Style 0'
Note: You can enter one of two values for level style: 0 and 1. Style 0 is the
default value which displays a rectangle bargraph. Style 1 displays a linear bar-
graph.
^GLY
Set a glyph to display
Syntax:
'^GLY-<variable text address range>,<glyph number>'"
Example:
SEND_COMMAND Panel,"'^GLY-1,10'"
Set a glyph with index 10 to the Mio-R3 display.
Note: This only works if a glyph file has been loaded from KeypadBuilder.
Page view 18
1 ... 18 19 20 ... 32

Comments to this Manuals

No comments