Amx Mio Modero Device Family User Manual download pdf (Page 25)

Programming The Mio Modero

Mio Modero Device Family

SEND_COMMANDs (Cont.)

@SWK Sends a string to the master upon wake up.

Syntax:

"'@SWK-<new text>'"

Variable:

• new text = 1 - 20 ASCII characters. Default string is WAKEUP.

Example:

SEND_COMMAND Panel,"'@SWK-Wake KeyPad"

Sends the string " Wake KeyPad " to the master at time of wake up.

^TXT-

(LCD equipped only)

Assign a text string to those LCD buttons with a defined address range. Sets non

unicode text.

Syntax:

"'^TXT-<variable text address range>,<new text>'"

Variables:

• variable text address range = 1 - 4; the address range corresponds to the dynamic line

number.

• new text = 1 - 20 characters (uses one byte Unicode values for all text

characters).

Examples:

1. SEND_COMMAND Panel,"'^TXT-1&3,Test Only'"

Sets the text "Test Only" on dynamic lines 1 and 3 of the LCD button.

2. SEND_COMMAND Panel,"'^TXT-2.4,'"

Clear text on dynamic lines 1 through 4 of the LCD button.

^UNI-

(LCD equipped only)

Set Unicode text. The Unicode text is sent as a two byte HEX value.

Syntax:

"'^UNI-<variable text address range>,',<unicode text>"

Variables:

• variable text address range = 1 - 4; the address range corresponds to the dynamic line

number.

• unicode text = Unicode HEX value.

Example:

SEND_COMMAND Panel, "'^UNI-1&4,',$00,$BD,$00,$B5"

Sets the Unicode characters '½µ' on dynamic lines 1 and 4 of the LCD button.

Note: Unicode is always represented in a two byte HEX value.

WAKE Force the device out of screen saver mode.

Syntax:

"'WAKE'"

Example:

SEND_COMMAND Panel,"'WAKE'"

Forces the device out of the screen saver mode.

1 ... 24 25 26 27 28

Comments to this Manuals

No comments

Amx Mio Modero Device Family User Manual Page 25

Comments to this Manuals

Related products and manuals for Remote control Amx Mio Modero Device Family