Amx Mio Modero Device Family User Manual download pdf (Page 20)

Mio Modero IR

Mio Modero Device Family

1. Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero IR.

2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power.

3. If the faceplate is connected to the mounting frame, place a flathead screwdriver in the notch at the

bottom right of the Mio Modero IR, and pry the faceplate from the mounting frame.

4. Connect the AxLink power supply. The connector passes through the center of the mounting frame and

connects to the board.

5. Place the mounting frame on the wallbox; align the screw holes with the mounting holes and fasten the

mounting frame to the wallbox using the screws supplied.

6. Attach the faceplate to the mounting frame first at the top and swing it to the bottom. See FIG. 16.

FIG. 16 Attaching the faceplate to the mounting frame

1 ... 19 20 21 22 23 24 25 26 27 28

No comments

Amx Mio Modero Device Family User Manual Page 20