Amx Mio Modero Device Family User Manual download pdf (Page 21)

Programming The Mio Modero

Mio Modero Device Family

Programming The Mio Modero

KeypadBuilder

Most functionality of the Mio Modero is handled using the application, KeypadBuilder. Go to www.amx.com

for the KeypadBuilder Instruction Manual.

There are a select number of SEND_COMMANDs the Mio Modero recognizes.

SEND_COMMANDs

Below is a list of SEND_COMMANDs accepted by the Mio Modero device family from NetLinx masters. As

indicated, not every command applies to all Mio Modero devices, e.g., the ^TXT command is not apparent

without an LCD upon which to display.

To use these commands, establish a Telnet session from the PC to the NetLinx master.

All text is based on a Unicode index.

SEND_COMMANDs

@BRT Set Brightness level

Syntax:

"'BRIT-<tag>,<awake brightness level>,<sleep brightness level>'"

Variables:

• brightness level # = a value from 0 - 32.

• tag = Red or Blue; affected LCDs

"'@BRT-#'" (Set LED Awake brightness level)

"'@BRT-##'" (Set LED Awake brightness level, sleep brightness level)

"'@BRT-tag#'" (Set Red or Blue LED, brightness level)

"'@BRT-tag##'" (Set Red or Blue LED, awake brightness level, and sleep brightness)

Examples:

(1) SEND_COMMAND Panel,"'@BRT-16'"

Sets the awake brightness level to 50%.

(2) SEND_COMMAND Panel,"'@BRT-32,5'"

Sets the awake brightness level to 100% and sleep brightness level to

approximately 15%

(3) SEND_COMMAND Panel,"'@BRT-RED,32'"

Sets the red LED awake brightness level to 100%.

(4) SEND_COMMAND Panel,"'@BRT-BLUE,32,5'"

Sets the Blue LED awake brightness level to 100% and sleep brightness level to

Approximately 15%

1 ... 20 21 22 23 24 25 26 27 28

No comments

Amx Mio Modero Device Family User Manual Page 21