Amx Mio Modero Device Family User Manual Page 1

Operation/Reference GuideControl System AccessoriesMio Modero®Device FamilyLast Revised: 12/16/2009

Installation6 Mio Modero Device FamilyChanging ButtonsThe Mio Modero Classic and Elite are shipped with "installation" buttons; they are int

Installation7 Mio Modero Device FamilyMio Modero PrestigeThe Mio Modero Prestige ships with sheets of common menu items and icons for creating inserts

Installation8 Mio Modero Device FamilyIf you later change the device number, remove and reconnect the AxLink power connector to enter the new device n

Installation9 Mio Modero Device FamilyAxLink Data and Power ConnectionsConnect the control system's AxLink connector to the AxLink connector on t

Installation10 Mio Modero Device FamilyMounting ProceduresFIG. 8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX

Installation11 Mio Modero Device Family6. Attach the faceplate to the mounting frame first at the top and swing it to the bottom. See FIG. 10. Podium

Installation12 Mio Modero Device FamilyAccent FrameWhile the Mio Modero device family does fit into many International wallboxes, it may be necessary

Mio Modero IR13 Mio Modero Device FamilyMio Modero IRThe Mio Modero IR (FIG. 11) is a remote IR receiver for use with NetLinx® Central Controllers and

Mio Modero IR14 Mio Modero Device FamilyWiring and InstallationSet the receive AxLink device number before installing the Mio Modero IR. FIG. 12 illus

Mio Modero IR15 Mio Modero Device FamilyAxLink Data and Power ConnectionsThe Mio Modero IR uses a four-pin mini AxLink connector for power and data.Co

AMX Limited Warranty and DisclaimerAMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years fr

Mio Modero IR16 Mio Modero Device Family1. Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero IR.2. Confirm tha

Programming The Mio Modero17 Mio Modero Device FamilyProgramming The Mio ModeroKeypadBuilderMost functionality of the Mio Modero is handled using the

Programming The Mio Modero18 Mio Modero Device FamilySEND_COMMANDs (Cont.)^CFG Set Keypad to Combine Mode. Combine mode allows yu to combine/uncombine

Programming The Mio Modero19 Mio Modero Device FamilySEND_COMMANDs (Cont.)^FML D L Sets a line of the display to a dynamic line with a level Syntax:&q

Programming The Mio Modero20 Mio Modero Device FamilySEND_COMMANDs (Cont.)^PRX- Sets the sensitivity for the proximity sensor.Syntax: "'^PRX

Programming The Mio Modero21 Mio Modero Device FamilySEND_COMMANDs (Cont.)@SWK Sends a string to the master upon wake up.Syntax:"'@SWK-<n

Programming The Mio Modero22 Mio Modero Device FamilyCombining ButtonsUse the ^CFG Send Command (see page 18) to combine/uncombine adjacent buttons on

Programming The Mio Modero23Mio Modero Device Family

12/09 ©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without

Table of ContentsiMio Modero Device FamilyTable of ContentsOverview ...

iiMio Modero Device FamilyTable of Contents^GLY ...

Overview1 Mio Modero Device FamilyOverviewThe Mio Modero device family provides a wide range of control capabilities in the form of keypads that are a

Overview2 Mio Modero Device FamilyAvailable Color SchemesThe Mio Modero device family is available in a range of colors, and the Elite supports a vari

Overview3 Mio Modero Device FamilyMio Modero LCD FeatureThe Mio Modero Elite is available with an optional LCD screen. The LCD is a scalable black-and

Overview4 Mio Modero Device Family

Installation5 Mio Modero Device FamilyInstallationThe basic front and rear components of the Mio Modero are as follows: Before touching the device