Amx Mio Modero Device Family User Manual download pdf (Page 24)

Programming The Mio Modero

Mio Modero Device Family

SEND_COMMANDs (Cont.)

^PRX- Sets the sensitivity for the proximity sensor.

Syntax:

"'^PRX-#'"

Variable:

• # = a value from 0 - 31.

Example:

SEND_COMMAND Panel,"'^PRX-15'"

Sets the proximity sensor for the device to a level of approximately 50%.

^SHO Show or hide text with a set variable text range.

Syntax:

"'^SHO-<variable text address range>,<command value>'"

Variables:

• variable text address range = 1 - 4; the address range corresponds to the dynamic line

number.

• command value = (0= hide, 1= show).

Example:

SEND_COMMAND Panel,"'^SHO-1,0'"

Hides text on dynamic line 1 of the LCD button.

SLEEP Force the device into screen saver mode.

Syntax:

"'SLEEP'"

"'SLEEP-#'" (timed sleep; a persistent command)

Variable:

• # = 0 - 60 in seconds; time to wait before going to sleep. Default is 30. 0 sets the

device to never sleep.

Example:

SEND_COMMAND Panel,"'SLEEP-45'"

Forces the device into screen saver mode after 45 seconds.

@SSL Sends a string to the master upon going to sleep.

Syntax:

"'@SSL-<new text>'"

Variable:

• new text = 1 - 20 ASCII characters. Default string is SLEEP.

Example:

SEND_COMMAND Panel,"'@SSL-KeyPad Sleep'"

Sends the string " KeyPad Sleep’ to the master at time of sleep.

@SST Sends a string to the master upon start up.

Syntax:

"'@SST-<new text>'"

Variable:

• new text = 1 - 20 ASCII characters. Default string is STARTUP.

Example:

SEND_COMMAND Panel,"'@SST-Panel Start'"

Sends the string " Panel Start " to the master at time of start up.

1 ... 23 24 25 26 27 28

Comments to this Manuals

No comments

Amx Mio Modero Device Family User Manual Page 24

Comments to this Manuals

Related products and manuals for Remote control Amx Mio Modero Device Family