Appendix A - Telnet (Terminal) Commands
49
Instruction Manual - Solecis Digital Switchers
Telnet Commands (Cont.)
Command Description
GET CONFIG Displays the current connection settings.
Example:
>get config
Device number: 7010
Connection Settings
--------------------------------
Mode: NDP
System Number: 2155
Master IP/URL: 192.168.43.83
Master Port: 1319
Username:
Password:
IP Settings
--------------------------------
HostName: SDX-510-000-EXB
Type: DHCP
IP Address: 192.168.43.63
Subnet Mask: 255.255.255.0
Gateway IP: 192.168.43.2
MAC Address: 00:60:9f:99:26:f1
DHCP Server : 192.168.43.2
Lease Origin : THU 01/09/2031 12:59:02
Lease Duration : SUN 01/12/2031 12:59:02 (259200 sec)
Lease Renew (T1): SAT 01/11/2031 00:59:02 (129600 sec)
Lease Rebind (T2): SUN 01/12/2031 03:59:02 (226800 sec
DNS Servers
--------------------------------
Domain suffix: amx.internal
Entry 1: 192.168.40.7
Entry 2: 192.168.40.8
Note: The system number and IP addressing information displayed is reflective of actual
operating values, not stored parameters.
GET CONNECTION Shows the Master connection information.
Example:
>get connection
Connection Settings
------------------------------
Mode: UDP URL
System Number: 1
Master IP/URL: 192.168.44.53
Master Port: 1319
Username:
Password:
GET DEVICE Displays the device number.
GET DNS Gets the list of DNS entries.
Example:
>get dns
DNS Servers
-------------------------------
Domain suffix: amx.internal
Entry 1: 192.168.40.7
Entry 2: 192.168.40.8
Note: When the switcher is in DHCP Mode, these are active values, NOT the stored
values that only apply to Static IP Mode.
Comments to this Manuals