AMX USB LAN Driver USBLAN Specifications

GETTING STARTED GUIDENI cRIO-9030Embedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGAFigure 1. cRIO-9030 Front PanelThis d

10 | ni.com | NI cRIO-9030 Getting Started GuideConfiguring the System in Measurement & Automation Explorer (MAX)After connecting the cRIO-9030 to

NI cRIO-9030 Getting Started Guide | © National Instruments | 116. Click Change Password.7. Enter and re-enter the new password, click OK, then click

12 | ni.com | NI cRIO-9030 Getting Started GuideNote Alternatively, you can select Sample Projects»CompactRIO on the left, then select one of the samp

NI cRIO-9030 Getting Started Guide | © National Instruments | 13Troubleshooting Network CommunicationWhat to Do if the cRIO-9030 Cannot Communicate wi

14 | ni.com | NI cRIO-9030 Getting Started GuideWhat to Do If You Cannot Find the cRIO-9030 in MAXIf you cannot find the cRIO-9030 in MAX, try the fol

NI cRIO-9030 Getting Started Guide | © National Instruments | 15STATUS LEDThe STATUS LED is off during normal operation. The cRIO-9030 indicates speci

© 2014 National Instruments. All rights reserved. 376260A-01 Aug14Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more informa

2 | ni.com | NI cRIO-9030 Getting Started GuideSafety GuidelinesCaution Do not operate the cRIO-9030 in a manner not specified in this document. Produ

NI cRIO-9030 Getting Started Guide | © National Instruments | 3Special Conditions for Hazardous Locations Use in EuropeSome chassis have been evaluate

4 | ni.com | NI cRIO-9030 Getting Started GuideSpecial Guidelines for Marine LocationsSome products are Lloyd’s Register (LR) Type Approved for marine

NI cRIO-9030 Getting Started Guide | © National Instruments | 5 A number 2 Phillips screwdriver A number 1 Phillips screwdriver A small flat-blade

6 | ni.com | NI cRIO-9030 Getting Started GuideInstalling C Series I/O Modules in the ChassisComplete the following steps to install a C Series I/O mo

NI cRIO-9030 Getting Started Guide | © National Instruments | 7Grounding the ChassisYou must connect the chassis grounding terminal to the grounding e

8 | ni.com | NI cRIO-9030 Getting Started Guide2. Install the ferrite, (National Instruments part number 711849-01, included in the shipping kit) acro

NI cRIO-9030 Getting Started Guide | © National Instruments | 97. Install the power connector on the front panel of the cRIO controller and tighten th