AMX AVB-WP-TX-MULTI-DXLINK Instruction Manual Page 32
- Page / 154
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Product Overview and Specifications
26
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
* For more details and helpful cabling information, reference the white paper titled “Cabling for Success with
DXLink” available at www.amx.com or contact your AMX representative.
AMX reserves the right to modify its products and their specifications without notice.
General Specifications (continued)
Parameter Value
Thermal Dissipation,
Enova DXLink Power Supplied (max.)
Multi-Format TX 34 BTU/hr., HDMI TX 31 BTU/hr.,
Wallplate TX 24 BTU/hr., Decor Wallplate TX 24 BTU/hr.,
HDMI RX 51 BTU/hr.
Power Connector (Modules Only) 2.1 mm DC power jack
Operational Temperature 32° F to 104° F (0° C to 40° C)
Storage Temperature -22° F to 158° F (-30° C to 70° C)
Operational Humidity 5 to 85% RH (non-condensing)
Storage Humidity 0 to 90% RH (non-condensing)
Module - Dimensions
Depth
Width
Height
5.15 in. (13.08 cm)
8.71 in. (22.12 cm)
1.00 in. (2.54 cm)
Module - Weight Approximately 1.1 lb. (0.50 kg)
Module - Shipping Weight Approximately 2.2 lb. (1.00 kg)
Modules - Mounting Options Compatible with all V Style versatile mounting options including rack,
surface, or pole (for V Style Mounting kits, see www.amx.com)
Wallplate TX - Dimensions
Depth
Width
Height
1.31 in. (3.33 cm)
5.98 in. (15.20 cm)
4.69 in. (11.90 cm)
Wallplate TX - Weight Approximately 1.4 lb. (0.64 kg)
Wallplate TX - Shipping Weight Approximately 2.0 lb. (0.91 kg)
Wallplate TX - Mounting Options Wallplate TX mounts onto standard double-gang US, UK, or EU back
boxes
Decor Wallplate TX -Dimensions
Depth
Width
Height
2.25 in. (5.72 cm)
3.48 in. (8.84 cm)
4.06 in. (10.31 cm)
Decor Wallplate TX - Weight Approximately 0.75 lb. (0.34 kg)
Decor Wallplate TX - Shipping Weight Approximately 1.35 lb. (0.61 kg)
Decor Wallplate TX - Mounting Decor Wallplate TX mounts in standard double-gang US back box
MTBF 381,000 hours
Transport Layer Throughput 10.2 Gbps
Twisted Pair Cable Type
Shielded Cat6, Cat6A, Cat7*
Twisted Pair Cable Length Up to 328 ft. (100 m)*
Important: DXLink twisted pair cable runs for DXLink equipment
should only be run within a common building.
Modules - Airflow Convection (openings on top of case)
Transmitters and Receiver
Inter-compatibility
All DXLink Transmitters can connect directly to the DXLink HDMI RX.
The Wallplate TX and Decor Wallplate TX require either PDXL-2
(FG1090-170) or PS-POE-AT-TC (FG423-84) to do so.
Spec - Twisted Pair Cable
Length
- Twisted Pair 1
- Transmitters/Receiver 1
- Contents 3
- ESD Warning 7
- Copyright Notice 10
- Liability Notice 10
- US FCC Notice 10
- Lithium Batteries Notice 11
- Trademark Notices 11
- Warnings and Cautions 11
- Applicability Notice 13
- Product Notes 13
- Product Compatibility Tables 14
- Common Applications 16
- Transmitters 16
- Multi-Format TX front view 16
- HDMI TX front view 16
- (Blinking = #3 Toggle OFF) 17
- Multi-Format TX rear view 21
- HDMI TX rear view 21
- Receiver 24
- HDMI RX front view 24
- HDMI RX rear view 25
- Common Features/Functionality 27
- HDCP Compliance 28
- General Specifications 31
- Shielded Cat6, Cat6A, Cat7* 32
- qualified): 1 per module 33
- Audio Format 34
- Analog Video Specifications 36
- Local Audio Specifications 37
- Installation and Setup 39
- Setup Information 40
- Example B 43
- Example C 43
- Example D 43
- Example A 43
- DXLink connections 44
- Avoid network loops 46
- V Style mounting hardware 50
- ICS LAN 10/100 LEDs 54
- (modules only) 54
- NetLinx LEDs 55
- DXLink LEDs 55
- Audio Type Precedence 56
- Important: Do not 57
- Rear view 57
- Front view 57
- HDMI RX – Applying Power 62
- IR Receiver cable (FG-IR03) 64
- ID Pushbutton Functions 65
- Manual Mode 66
- DXLink Transmitter 68
- Network Configuration 69
- TCP/IP Address Configuration 70
- Factory Default Parameters 71
- Device IDs 72
- Using the ID Pushbutton 72
- LED columns 77
- IRL File Transfers 79
- Transferring IRL Files 82
- Additional Documentation 84
- Device Numbering and Ports 85
- Overview 85
- CHANNELs 87
- Aspect Ratio Options 89
- VIDIN_PREF_EDID 93
- IR SEND_COMMANDs 97
- GET MODE 98
- Serial SEND_COMMANDs 101
- DXLink System SEND_COMMANDs 104
- SEND_STRING Escape Sequences 105
- Troubleshooting 107
- Determining HDCP Compliance 108
- Power Issues 108
- DXLink Connection Issues 109
- Network Setup Issues 110
- Technical Support 110
- Extender System (Standalone) 111
- Important Upgrade Information 114
- Transferring KIT Files 115
- Telnet Username and Password 118
- Telnet Commands (continued) 120
- Master Connection Modes 125
- Windows Client Programs 126
- Linux Telnet Client 126
- Receivers is 192.168.1.2) 127
- Creating a Virtual Master 129
- Click to open the 129
- Communication Settings 129
- CONNECTION and press Enter 132
- HD-15 Connector Cable Pinout 134
- DVI-I signal is required 135
- SEND_COMMANDs 141
- CEA (RGB Color Space): 142
- CVR (RGB Color Space): 143
- CVT (RGB Color Space): 144
- DMR (RGB Color Space): 145
- DMT (RGB Color Space): 145
- Applicability 147
- Remove jackscrew and washer 148
- Appendix H – EDID Programming 149
- DXLink Connection to PC 150
- EDID Programmer View 151
- 06/20/13 154
Related products and manuals for Wall transmitters AMX AVB-WP-TX-MULTI-DXLINK
(24 pages)© 2020, manymanuals.com. All rights reserved. | 2.545 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals