AMX NXD-500i Specifications download pdf (Page 55)

Upgrading Modero Firmware

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

7. Enter the System number (default is 1).

8. Click OK three times to close the open dialogs, save the settings, and return to the main NetLinx Studio

application.

9. Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System.

The default System value is one.

10. Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list.

The panel will not appear as a device below the virtual system number in the Online Tree tab until both

the system number used in step 7 for the Virtual NetLinx Master (VNM) is entered into the Master

Connection section of the System Settings page.

Step 3: Confirm and Upgrade the firmware via the USB port

Use the CC-USB Type-A to Mini-B 5-wire programming cable (FG10-5965) to provide communication

between the mini-USB Program port on the touch panel and the PC. This method of communication is used to

transfer firmware Kit files and TPD4 touch panel files.

1. Verify that the direct USB connection (Type-A on the panel to mini-USB on the panel) is configured

properly using the steps outlined in the previous two sections.

2. After the Communication Verification dialog window verifies active communication between the Virtual

Master and the panel, click the OnLine Tree tab in the Workspace window (FIG. 36) to view the devices

on the Virtual System.

The default System value is one.

3. Right-click on the System entry (FIG. 36) and select Refresh System to re-populate the list.

Verify the panel appears in the OnLine Tree tab of the Workspace window.

The default Modero panel value is 0.

FIG. 35 Virtual NetLinx Master Settings dialog

If the G4 panel does not appear, refer to the Troubleshooting section on page 129 for

more information.

A mini-USB connection is only detected after it is installed onto an active panel. This

allows the PC to detect the panel and assign an appropriate USB driver.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 153 154

No comments

AMX NXD-500i Specifications Page 55