AMX NXD-500i Specifications download pdf (Page 51)

Configuring Communication

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

8. In some cases, a Connection Details dialog (FIG. 32) may appear that requests a VNC Server IP Address.

This is the IP address of the target touch panel, not the IP of the Master.

The IP address may be found in the System Settings page (for more information, please refer to the

System Settings Page section on page 57).

If this field does not appear, continue to step 9.

9. If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password

dialog box appears on the screen within the secondary browser window.

10. Enter the Web Control session password into the Session Password field (FIG. 31).

This password was previously entered into the Web Control Password field within the G4 Web Control

page on the panel.

11. Click OK to send the password to the panel and begin the session.

A confirmation message appears stating "Please wait, Initial screen loading.".

The secondary window then shows the same G4 page being displayed on the target G4 panel.

A small circle appears within the on-screen G4 panel page and corresponds to the location of the mouse cursor.

A left-mouse click on the computer-displayed panel page is the same as an actual touch on the target G4 panel

page.

The G4 Web Control application is sent by the panel to the computer that is used for

communication. Once the application is installed, this popup will no longer appear.

This popup will only appear if connecting to the target panel using a different

computer.

FIG. 32 Connection Details dialog

IP Address of touch panel

obtained from IP Settings section of

the System Connection page

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 153 154

No comments

AMX NXD-500i Specifications Page 51