AMX NXD-500i Specifications download pdf (Page 22)

Installation

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Refer to the diagram for detailed installation dimensions as shown in FIG. 7.

Cutting out the surface slightly smaller than what is outlined in the installation drawings, in order to

make any necessary cutout adjustments, is highly recommended.

1. Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.

2. Cut out the surface for the back box. Refer to the dimensions in FIG. 7 for more information.

3. Remove the Faceplate/bezel (A in FIG. 8) from the main NXD-500i device (B in FIG. 8) by gripping the

faceplate and pulling up and then out with gentle outward force.

FIG. 7 NXD-500i Wall Mount panel dimensions

Making sure that the actual cutout opening be slightly smaller than the provided

dimensions is highly recommended. This action provides the installer with a margin

for error if the opening needs to be expanded. Too little drywall removed is always

better than too much.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 153 154

No comments

AMX NXD-500i Specifications Page 22