AMX NXD-500i Specifications download pdf (Page 53)

Upgrading Modero Firmware

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Upgrading Modero Firmware

Overview

Before beginning the Upgrade process:

Set up and configure your NetLinx Master. Refer to the particular NetLinx Master Instruction

Manual for detailed setup procedures.

Calibrate and prepare the communication pages on the panel for use. Refer to the Panel

Calibration section on page 21.

Refer to the NetLinx Studio version 2.x or higher Help file for more information on uploading files.

Configure the panel for a direct connection. Refer to the Configuring Communication section on

page 23 for more information.

The process of updating firmware involves the use of a communicating NetLinx Master. The required steps for

updating firmware to a Modero panel are virtually identical to those necessary for updating Kit files to a

NetLinx Master, except the target device is a panel instead of a Master. Refer to either the Master’s User

Manual or Studio 2.x Help file for those procedures.

Upgrading the Firmware via the USB port

Before beginning with this section, verify your panel is both powered and the Type-A USB connector is

securely inserted into the PC’s USB port.

The panel must be powered on before connecting the mini-USB connector to the panel.

Step 1: Configure the panel for a USB Connection Type

After the installation of the USB driver has been completed, confirm the proper installation of the large

Type-A USB connector to the PC's USB port and restart your machine.

2. After the NXD-500i panel powers-up, press and hold the grey Front Setup Access button for 4 seconds

to continue with the setup process and proceed to the Setup page.

3. Select Protected Setup > System Settings, located on the lower-left, to open the System Settings page.

4. Insert the mini-USB connector into the Program Port on the panel.

It may take a minute for the panel to detect the new connection and send a signal to the PC, indicated by a

green Connection Status icon.

If a few minutes have gone by and the Connection Status icon still does not turn green, complete the

procedures in the following section to set up the Virtual Master and refresh the System from the Online

Tree. This action sends out a request to the panel to respond and completes the communication, turning

the Connection Status icon green.

5. Navigate back to the System Status page.

A touch panel which is not using a valid username and password will not be able to

communicate with a secured Master. If you are updating the firmware on or through a

panel which is not using a username or password field, you must first remove the

Master Security feature to establish an unsecured connection.

Establishing a USB connection between the PC and the panel prior to installing the

latest NetLinx Studio and TPDesign4 applications will cause a failure in the USB

driver installation.

This driver must first be saved to the PC as part of the new NetLinx Studio and

TPDesign4 application installations.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 153 154

Comments to this Manuals

No comments

AMX NXD-500i Specifications Page 53

Comments to this Manuals

Related products and manuals for Touch screen monitors AMX NXD-500i