AMX MAX-CSD 10 Specifications download pdf (Page 70)

Displaying Stream Content

MAX-CSE/MAX-CSD10 Operation/Reference Guide

media content. If the network can only handle a throughput of 4 Mbps from the encoder, it is

recommended that you use something less than or equal to the High Quality encoder profile.

To receive and display content via a third-party media player (such as the VLC media player):

 Verify you are using the latest VLC Player application available at:

http://www.videolan.org/vlc/.

 UDP transmission of a stream only requires one instance of the VLC Player to display the

combined A/V content.

 Note that if you are going to try to stream both audio and video to a target computer as

separate streams, you will need to open two separate instances of this same application.

 One window will display the video portion of the stream (provided by the Target Port

field on the Streaming Profiles page), whereas the second window provides the audio

portion of the stream (provided by the Target Audio Port field on the Streaming Profiles

page).

 Obtain the IP Address of the target computer by using the ipconfig command. This process is

described in greater detail later in this section.

Setting up a Modero Panel to Receive and Display a Stream

The MAX-CSE must first be prepared to stream to the target Modero panel prior to creating the

necessary TPDesign4 panel pages (later be uploaded to the panel).

Obtaining the IP Address of the target panel

Press the grey Front Setup Access button for 3 seconds to open the Setup page (FIG. 40).

2. Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected

Setup page and display an on-screen keypad.

3. Enter 1988 into the Keypad’s password field and press Done when finished.

4. Press the System Settings button (located on the Protected Setup page) to open the System Settings

page and obtain the IP information from the IP Address field (FIG. 41).

FIG. 40 Setup page

Connection Status

Red Connection Status icon -

Green Connection Status icon -

indicates no connection to a Master

indicates communication to a Master

1 ... 69 70 71 ... 110

No comments

AMX MAX-CSD 10 Specifications Page 70