AMX MAX-CSD 10 Specifications download pdf (Page 41)

MAX-CSE Web Interface

MAX-CSE/MAX-CSD10 Operation/Reference Guide

Changing the NetLinx Master Connection

From the NetLinx Settings page, select between Listen, Auto, and URL in the Mode drop-down

menu.

2. If you selected Auto as your Mode, enter the new system number in the System Number field, if

necessary.

3. Enter the new Device number in the Device Number field, if necessary.

4. If you selected URL as your Mode, enter the Master’s IP address or URL in the Master IP/URL

field, if necessary.

5. Enter the Master port number in the Master Port Number field, if necessary.

6. If you already allowed encryption with the Master, select Enabled or Disabled from the Encryption

radio buttons. If you did not, these fields will be greyed out and automatically set to Disabled.

7. If the unit is already connected to the Master, enter your username and password in the Username

and Password fields.

8. To save your changes, click the Apply button. If you wish to return to the previously saved settings.

click Cancel.

9. Click Refresh to update your changes on the NetLinx Settings page.

IP Settings Page

The IP Settings page (FIG. 20) is accessed by clicking on the NetLinx button in the Navigation Bar. This

page allows a user (with the proper access rights) to configure the IP communication parameters used by

the MAX-CSE to effect a proper IP connection.

FIG. 20 IP Settings page

1 ... 40 41 42 ... 110

No comments

AMX MAX-CSD 10 Specifications Page 41