AMX MET-7 Specifications download pdf (Page 77)

Using the NetLinx Module

Metreau Keypads

Setup - Alarms

Press Alarm on the main Setup page to access the Alarms page (FIG. 89). Use the options in this page to set

alarms for one or more selected Zones. An "Alarm" can be programmed to play a specific source in any

specified Zone.

Adding an Alarm

Touch one of the location (Zone) buttons to select the Zone for which you want to set an alarm.

2. Set the start time for the alarm using the H (hour) and M (minute) up/down arrows. Note that the alarm

clock uses a 24-hour clock time. Refer to the following table to quickly convert regular time to 24-hour

clock time standards:

Regular and 24-hour clock time use the same number of minutes per hour and they use minutes in

exactly the same way. There is no need to convert minutes when going back and forth between the

two time systems.

The alarm clock treats midnight as the start of a new day and express it as "0000".

3. Once the time has been set, the "choose source" option is enabled (FIG. 90):

FIG. 17 Setup - Alarms page

Regular Time 24-hour Clock

(hour value)

Regular Time 24-hour Clock

(hour value)

Midnight 00 Noon 12

1:00 a.m. 01 1:00 p.m. 13

2:00 a.m. 02 2:00 p.m. 14

3:00 a.m. 03 3:00 p.m. 15

4:00 a.m. 04 4:00 p.m. 16

5:00 a.m. 05 5:00 p.m. 17

6:00 a.m. 06 6:00 p.m. 18

7:00 a.m. 07 7:00 p.m. 19

8:00 a.m. 08 8:00 p.m. 20

9:00 a.m. 09 9:00 p.m. 21

10:00 a.m. 10 10:00 p.m. 22

11:00 a.m. 11 11:00 p.m. 23

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83 84

No comments

AMX MET-7 Specifications Page 77