AMX MET-7 Specifications download pdf (Page 60)

Advanced Functions - DAS-MET-6SRC

Metreau Keypads

Grouping Volume Control

When initially creating a zone grouping, all members of the group will have the volume set to the same level.

The volume can then be adjusted on an individual zone basis, by using the Navigation Wheel (on the DAS-

MET-6SRC keypad) in each zone. Adjusting the volume level for the entire Group can be made at any time, as

described below:

1. Press the Group button to enter Group Mode (all Source LED’s turn On).).

2. Adjust Volume using the Navigation Wheel (on the DAS-MET-6SRC keypad).

3. Press ENTER to complete.

Working With Alarms

To use the Alarm feature, a System Time must first be entered on the Main Controller, via the Front LCD.

To set an alarm from each Keypad, select a Source, adjust the volume, and set the alarm time (using 24HR

clock, as described below).

When the alarm time is reached, the Source selected will turn On, and the volume will ramp up to the set

volume and begin playing. At this point the source will behave normally.

Setting the System Clock on the Tango Audio Controller

From the LCD on the front panel of the Tango Audio Controller:

1. Select CLOCK

2. Select Set Time to display the following screen (FIG. 66):

FIG. 13 Grouping Volume Control

Press ENTER to save

Rotate wheel to adjust volume

Press the Group button to

enter Zone Grouping mode

(all Source LEDs light)

All Zones will have the volume incremented by the adjustment being made.

To bring all Zones to the same volume level (after individual Zone adjustments have

been made), enter Zone Grouping mode (Buttons 1&2) and decrease the volume to

0db, then increase the volume to desired level.

If a Favorite has been set, the Favorite will begin playing. Otherwise, the last station/

CD will begin playing.

FIG. 14 Setting the System Clock on the Tango Audio Controller

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

No comments

AMX MET-7 Specifications Page 60