AMX MET-7 Specifications download pdf (Page 67)

Using the NetLinx Module

Metreau Keypads

The Zone Options and Change Source buttons provide additional options:

Press Zone Options to configure audio settings for this Location (Zone).

Press Change Source to select a different source Device for this Location.

Zone Options

From a Location / Device page, press Zone Options to invoke the Zone Options popup shown in FIG. 77:

Use the Up/Down buttons to adjust Bass and Treble for this Location. The current levels are

indicated in the vertical status bars adjacent to each set of Up/Down buttons (default = flat).

Touch-and-drag the slider to adjust the Balance setting (default = centered).

Touch the SRS menu to select an SRS mode (default = SRS Off).

When finished, press exit to apply changes and close the Zone Options popup.

Change Source

From a Location / Device page, press Change Source to invoke the Sources page for this Location, as shown

in FIG. 78:

This page allows you to change the source device to be used for the selected Location. Note that the currently

selected Location is indicated on the right side of this page.

To change sources for this Location, simply press the desired Source button. This action invokes the Device

Control Page for the selected Device type. Use the options in the Device Control page to control playback.

FIG. 5 Zone Options popup

FIG. 6 Sources Page (for the "Dining Room" Location)

Currently

selected

Location

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 83 84

No comments

AMX MET-7 Specifications Page 67