AMX PTM-D15 Service Manual download pdf (Page 69)

Setting the Timer

In the descriptions below, the following settings are used for the temperature and

time indicator selector button on the bottom front section of the remote control.

• Temperature: °F

• Time: AM, PM

1. How to set the present

time

(Example) To set to 10:30 pm.

2. How to set the OFF time

(Example) To stop the air conditioner at 11:00 am.

NOTE

Operation Indication

1. Press the CLOCK button once if

the time indicator is not flashing.

The time indication alone flashes.

2. Press the Advance, Return ( ,

) button until PM 10:30 is

displayed.

The time can be set in 1-minute

increments. Holding down the button

advances the time rapidly in 10-minute

increments.

3. Press the CLOCK button again. This completes the setting of the

current time.

1. Press the OFF TIME setting

button once.

The timer indication is displayed,

and the present OFF time is shown.

2. Press the Advance, Return ( ,

) button until AM 11:00 is

displayed.

The timer indication blinks.

The time can be set in 10-minute

increments. Holding down the button

advances the time rapidly in 10-minute

increments.

3. Wait a few seconds, and then the

setting is complete.

The timer indication stops

blinking and the present time is

displayed.

OI-802-18-EG

01_KHS0971_EN.fm Page 18 Tuesday, September 27, 2005 2:53 PM

1 ... 68 69 70 71 72 73 74 75 76 77

Comments to this Manuals

No comments

AMX PTM-D15 Service Manual Page 69

Comments to this Manuals

Related products and manuals for TVs & monitors AMX PTM-D15