AMX PTM-D15 Service Manual download pdf (Page 28)

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.

To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:

In direct sunlight

Behind a curtain or other place where it is covered

More than 26' (8 m) away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic interference

Where there is an obstacle between the remote control unit and the air conditioner (since a check signal is sent

from the remote control unit every 5 minutes)

7-3-1. Mounting on a Wall

Before mounting the

remote control unit, press

the ON/OFF operation

button at the mounting

location to make sure that

the air conditioner

operates from that

location. The indoor unit

should make a beeping

sound to indicate that it

has received the signal.

Fig. 7

To take out the remote control unit, pull it forward.

Hole

Remote control unit mount

Rear side

Press

Set in

place

To prevent loss of the remote control

unit, you can connect the remote

control unit to the mount by passing

a string through the remote control

unit and attachment hole.

Mounting screws

5/32 × 5/8"(4 × 16mm)

(included)

1 ... 27 28 29 ... 77

No comments

AMX PTM-D15 Service Manual Page 28