AMX D-1000 Specifications download pdf (Page 36)

Upgrading Firmware

MXD/T-1000 10.1" Modero X Series® Touch Panels

Viewing devices on the Virtual System

After the Communication Verification dialog window verifies active communication between the Virtual Master and

the panel, click the OnLine Tree tab in the Workspace window (FIG. 31) to view the devices on the Virtual System.

The default System value is 1.

2. Right-click on the System entry (FIG. 31) and select Refresh System to re-populate the list. Verify the panel

appears in the OnLine Tree tab of the Workspace window.

Downloading firmware

If the panel firmware version is not the latest available; locate the latest firmware file from www.amx.com.

2. Click on the desired Kit file link and after accepting the Licensing Agreement, verify download of the Modero Kit

file to a known location.

3. Select Tools > Firmware Transfers > Send to NetLinx Device from the main menu to open the Send to NetLinx

Device dialog (FIG. 32). Verify that the panel’s System and Device number values match those values listed within

the System folder in the OnLine Tree tab of the Workspace window.

4. Select the appropriate Kit file from within the Browse for Folder window (FIG. 33).

FIG. 31 NetLinx Workspace window (showing panel connection via a Virtual NetLinx Master)

Virtual Master firmware

version and device number

Panel firmware version

and device number

The panel-specific firmware is shown on the right of the listed panel.

Download the latest firmware file from www.amx.com and then save the Kit file to

your computer. Note that each Kit file is intended for download to its corresponding

panel. In some cases, several Kit files may be included in a .zip file; extract the .zip

file to access the required Kit file.

FIG. 32 Send to NetLinx Device dialog window

1 ... 35 36 37 38 39 40 41 42

No comments

AMX D-1000 Specifications Page 36