AMX D-1000 Specifications download pdf (Page 28)

Installation

MXD/T-1000 10.1" Modero X Series® Touch Panels

2. With a stout, strong point (a push pin or straightened paperclip, for example), carefully press into the access holes in

either end of the molding (FIG. 23) until the snap is disconnected. To facilitate the disconnection, grasp the bottom

of the panel (Landscape) or right side (Portrait) and pull gently outward until the side of the panel is free of the

snap..

3. When the first side is free, repeat the process with the other.

4. With the edge of the touch panel free, carefully lift up and out (Landscape) or to the left and out (Portrait) to remove

the touch panel from the back box. Be careful not to pull on the cables or connectors.

5. To reattach the panel to its back box, repeat the installation procedure on page 20.

FIG. 23 Location of access holes on MXD-1000 molding

Access holes

Always pull on the frame of the touch panel. NEVER pull on the glass edge.

1 ... 27 28 29 ... 42

No comments

AMX D-1000 Specifications Page 28