AMX D-1000 Specifications download pdf (Page 34)

Upgrading Firmware

MXD/T-1000 10.1" Modero X Series® Touch Panels

Upgrading Firmware Via NetLinx Studio

The MXT-1000 and MXD-1000 use an Ethernet connection for programming, firmware updates, and touch panel file

transfer via NetLinx Studio. If you have access to the panel’s network, you may transfer files directly to the panel

through NetLinx Studio

To upgrade firmware via NetLinx Studio:

1. Launch NetLinx Studio and select Settings > Master Communication Settings from the Main menu to open the

Master Communication Settings dialog (FIG. 28)

2. Click the Communications Settings... button to open the Communications Settings dialog box (FIG. 29).

3. Click on the NetLinx Master radio button from the Platform Selection section.

4. Click on the Virtual Master radio box from the Transport Connection Option section to configure the PC to

communicate directly with a panel. Everything else, such as the Authentication, is greyed-out because this

connection is not going through the Master’s UI.

Firmware upgrades cannot be made through an Ethernet-connected PC to the touch

panel, unless that PC is connected to the panel’s network. Upgrades cannot be made

with NetLinx Studio through a USB connection to the panel from a PC. For more

information on firmware transfers, please refer to the online help in NetLinx Studio.

FIG. 28 Master Communications Settings dialog

FIG. 29 Communications Settings dialog

1 ... 33 34 35 36 37 38 39 40 41 42

No comments

AMX D-1000 Specifications Page 34