AMX Rack Rail Kit MMS Servers Specifications Page 48
- Page / 142
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
4405ch02 Architecture and technical overview.fm Draft Document for Review May 28, 2009 1:59 pm
34 IBM Power 570 Technical Overview and Introduction
If the initial p5 570 server does not configure supported DDR2 memory, then the target 570
can be configured with FC 5622 processor card and the desired amount of memory must be
included in the model migration order.
Figure 2-7 Memory DIMM slots for FC 5621
A 570 with FC 5621 processor cards can be expanded by purchasing additional 570
enclosures with FC 5622 processor cards. FC 5621 and FC 5622 cannot be mixed within the
same 570 enclosure but can be mixed in the same system. Maximum memory configurable
depends from the number of FC 5621 and FC 5622 processor cards available in the fully
combined 570 system.
2.4.4 OEM memory
OEM memory is not supported or certified for use in IBM System p servers. If the 570 is
populated with OEM memory, you could experience unexpected and unpredictable behavior,
especially when the system is using Micro-Partitioning technology.
All IBM memory is identified by an IBM logo and a white label that is printed with a barcode
and an alphanumeric string, as illustrated in Figure 2-8 on page 35.
Important: The process to migrate a p5 570 to a 570 requires analysis of the existing
p5 570 memory DIMMs. Contact an IBM service representative before issuing the
configuration upgrade order.
J1D
J0D
J0C
J1C
J1A
J0A
J0B
J1B
POWER6
chip
L3 cache
Memory buffer
chip
D
Memory buffer
chip
A
Memory buffer
chip
C
Memory buffer
chip
B
- Redpaper 1
- October 2008 3
- First Edition (October 2008) 4
- Contents 5
- Contents v 7
- Trademarks 10
- Become a published author 12
- Comments welcome 13
- General description 15
- 1.1 System specifications 17
- 1.2 Physical package 17
- 1.3 System features 18
- 1.3.2 Memory features 20
- 1.3.4 I/O drawers 22
- Front Rear 24
- 1.4 System racks 26
- Physical specifications 28
- Client responsibilities 28
- 1.4.5 Rack-mounting rules 31
- 1.4.6 Useful rack additions 32
- 1.4.7 OEM rack 33
- Architecture and technical 37
- 2.1 The POWER6 processor 38
- Figure 2-2 POWER6 processor 39
- 2.1.1 Decimal floating point 40
- 2.3 Processor cards 43
- 2.3.2 Processor clock rate 44
- 2.4 Memory subsystem 45
- 2.4.4 OEM memory 48
- 2.5 System buses 49
- 2.5.2 Service processor bus 50
- 2.6 Internal I/O subsystem 51
- 2.6.1 System ports 52
- POWER6 chip 56
- 2.8 PCI adapters 57
- 2.8.1 LAN adapters 58
- 2.8.2 SCSI and SAS adapters 58
- 2.8.3 iSCSI 59
- IBM iSCSI adapters 60
- 2.8.4 Fibre Channel adapter 61
- 2.8.5 Graphic accelerators 61
- 2.9 Internal storage 62
- 2.9.2 Split backplane 63
- 2.9.3 Internal media devices 63
- 2.10 External I/O subsystems 64
- 7311 Model D11 features 65
- PCI-X Bridge 66
- PCI-X slots 67
- SPCN cabling examples 68
- YO Cable 71
- IBM AIX 5L 77
- IBM AIX V6.1 77
- Linux for System p systems 78
- 2.13 Service information 79
- 2.14 System firmware 81
- System firmware download site 82
- 2.14.1 Service processor 84
- System Management Services 86
- Open Firmware 87
- Virtualization 89
- 3.1 POWER Hypervisor 90
- Virtual SCSI 91
- Virtual Ethernet 91
- Virtual (TTY) console 91
- 3.2 Logical partitioning 92
- 3.2.3 Processing mode 93
- Dedicated mode 94
- Shared dedicated mode 94
- Shared mode 94
- 3.3 PowerVM 95
- Shared Ethernet Adapter 96
- Chapter 3. Virtualization 83 97
- 3.3.3 PowerVM Lx86 99
- Supported Operating Systems 100
- Chapter 3. Virtualization 87 101
- Chapter 3. Virtualization 89 103
- 3.4 System Planning Tool 105
- Continuous availability and 107
- Component failure rates 108
- 4.2 Availability 109
- Persistent deallocation 110
- Memory protection 113
- Memory page deallocation 114
- Memory control hierarchy 114
- Memory deconfiguration 115
- L2 Array Protection 116
- 4.2.4 PCI Error Recovery 117
- 4.3 Serviceability 118
- 4.3.1 Detecting errors 119
- Error checkers 120
- Fault Isolation Registers 120
- 4.3.2 Diagnosing problems 121
- Boot-time 122
- Device drivers 122
- 4.3.3 Reporting problems 123
- Extended Error Data (EED) 124
- System dump handling 124
- Customer notify 124
- Call home 124
- Guiding light LEDs 125
- The operator panel 125
- Concurrent maintenance 126
- Blind-swap PCI adapters 126
- Firmware updates 126
- Repair and verify 127
- 4.5 Manageability 130
- Graphics terminal 134
- Example 4-1 135
- 4.6 Cluster solution 136
- Related publications 139
- Online resources 140
- How to get Redbooks 140
- Help from IBM 140
Related products and manuals for Servers AMX Rack Rail Kit MMS Servers
Servers AMX MAX-CSE Specifications
(114 pages)
(114 pages)
Servers AMX MAX-CSD 10 Specifications
(110 pages)
(110 pages)
© 2020, manymanuals.com. All rights reserved. | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals