Amx Modero NXT-1200V User Manual download pdf (Page 95)

Upgrading Modero Firmware

NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel

Step 2: Upgrade the NXA-BASE/B firmware via an IP

Click on the OnLine Tree tab in the Workspace window to view the devices on the System.

The default System value is one.

2. Right-click the associated System number (from the Workspace) and select Refresh System to detect of

all devices on the current system, establish a new connection to the Master, and refresh the System list

with devices on that system.

3. After the Communication Verification dialog window verifies active communication between the PC and

the Master, verify the target panel appears in the OnLine Tree tab of the Workspace window. The default

Modero panel value is 10001. The NXA-BASE/B will not appear on the system listing.

4. Locate the latest Kit file by first logging in to www.amx.com and then navigate to Tech Center >

Firmware Files and from within the Modero section of the web page locate the Modero Battery Base

section of the website.

5. Click on the desired Kit file link and after you’ve accepted the Licensing Agreement, verify you have

downloaded the Modero Battery Base Kit file to a known location.

6. From within Studio, select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu

to open the Send to NetLinx Device dialog (FIG. 82). Verify the panel’s System and Device number

values match those values listed within the System folder in the OnLine Tree tab of the Workspace

window.

FIG. 81 Battery Base page

The battery base firmware is shown on the right of the Battery Base page.

Verify you have downloaded the latest firmware file from www.amx.com and then

save the Kit file to your computer.

1 ... 94 95 96 ... 178

No comments

Amx Modero NXT-1200V User Manual Page 95