Amx Modero NXT-1200V User Manual download pdf (Page 27)

Touch Panel Accessories

NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel

Installation and Upgrade of the Internal NXT Components

Upgrading the components within the Table Top panel involves removing the outer housing (with speaker

plate), removing and/or installing an existing component, and then placing the outer housing back onto the

NXT panel, as described in the following sections.

Step 1: Remove the existing NXT Outer Housing

Carefully detach all connectors from the rear of the touch panel and then gently place the touch panel

LCD facedown onto a soft cloth to expose the under-side of the base (FIG. 17). This step helps prevent

scratching of the LCD.

2. Tilt the base forward so that both the bottom surface and Housing Screws are easily accessible and then

carefully remove the four plastic adhesive feet.

3. While holding the outer housing and base plate at a 45° (to prevent it from sliding), use a grounded

Phillips-head screwdriver to remove the eight Housing Screws.

NXA-PCI80211G Specifications (Cont.)

Power Consumption: • @ 802.11b communication:

- RX: 300 mA

- TX: 64 mA

- Sleep: 12mA

• @ 802.11g communication:

- RX: 330 mA

- TX: 575 mA

- Sleep: 12mA

Radio Data Rate: • 802.11g compliant: 1, 2, 5.5, 11 (DSSS/CCK); 6, 9, 12, 18, 24, 36, 48, and 54

(OFDM) Mbps data rates

Receiver Sensitivity: • Using 802.11b communication:

1 Mbps: -86 dBm (max)

2 Mbps: -84 dBm (max)

5.5 Mbps: -83 dBm (max)

11 Mbps: -80 dBm (max)

• Using 802.11g communication:

1 Mbps: -86 dBm (max)

2 Mbps: -84 dBm (max)

5.5 Mbps: -83 dBm (max)

11 Mbps: -80 dBm (max)

Security: • 64-bit and 128-bit WEP

Availability: • All 1200V-Series and VG-Series NXT Table Top panels can be field upgraded

for wireless communication using the optional NXA-PCI80211G mini-PCI

card.

• Optional to the following NXD panels:

- NXD-1200V

- NXD-1200VG

- NXD-1500VG

- NXD-1700VG

Do not use Ethernet cables containing mounting boots. These boots could make

removal of the Ethernet connectors (from the panel) difficult and cumbersome.

Reference the location of the four plastic adhesive "feet". Once the outer housing is

placed back onto the panel, these "feet" must be placed back in their original

locations so they can fit into their provided openings on a Battery Base.

1 ... 26 27 28 ... 178

Comments to this Manuals

No comments

Amx Modero NXT-1200V User Manual Page 27

Comments to this Manuals

Related products and manuals for Monitors Amx Modero NXT-1200V