Amx Modero NXT-1200V User Manual download pdf (Page 133)

Programming

121

NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel

"^" Button Commands (Cont.)

^BFB

Set the feedback

type of the button.

ONLY works on General-type buttons.

Syntax:

"'^BFB-<vt addr range>,<feedback type>'"

Variable:

variable text address range = 1 - 4000.

feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).

Example:

SEND_COMMAND Panel,"'^BFB-500,Momentary'"

Sets the Feedback type of the button to 'Momentary'.

^BIM

Set the input

mask for the

specified address.

Syntax:

"'^BIM-<vt addr range>,<input mask>'"

Variable:

variable text address range = 1 - 4000.

input mask = Refer to theText Area Input Masking section on page 156 for character

types.

Example:

SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'"

Sets the input mask to ten ’A’ characters, that are required, to either a letter or digit

(entry is required).

^BLN

Set the number of

lines removed

equally from the

top and bottom of

a composite video

signal.

The maximum number of lines to remove is 240. A value of 0 will display the incoming

video signal unaffected. This command is used to scale non 4x3 video images into non 4x3

video buttons.

Syntax:

"'^BLN-<vt addr range>,<button states range>,<number of lines>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).

number of lines = 0 - 240.

Example:

SEND_COMMAND Panel,"'^BLN-500,55'"

Equally removes 55 lines from the top and 55 lines from the bottom of the video button.

1 ... 132 133 134 ... 178

Comments to this Manuals

No comments

Amx Modero NXT-1200V User Manual Page 133

Comments to this Manuals

Related products and manuals for Monitors Amx Modero NXT-1200V