Using the NetLinx Module
Device Control Pages
There is separate Device Control page for each device type, with options specific to each device type, as
described in the following sub-sections.
Internal Tuner
Touch Internal Tuner to invoke the Device Control page shown in FIG. 80:
The options on this page include:
FIG. 80 Device Control page - Internal Tuner
Device Control Page - Internal Tuner
Display Window: Displays the current frequency and band (AM/FM).
Seek Up/Down: Press the Up and Down arrow buttons to seek up/down on the selected band.
Mono/Stereo: Press to toggle mono/stereo (default = Stereo).
FM/AM: Press to toggle band (FM/AM)
Keypad: Use the keypad button for direct tuning. Press enter to tune to the specified
frequency. Note that the tuner automatically detects the band (AM/FM) based
on the number entered.
Presets: Use the Presets buttons to recall up to ten station presets.
Zone Options: Press to access the Zone Options popup for configuring audio settings for the
selected Location (Zone). Note that the currently selected Location is indicated
in the upper-right corner of the page (see the Zone Options section on
page 61).
Change Source: Press to access the Sources page for this location. Note that the currently
selected Source is indicated in the upper-left corner of the page (see the
Change Source section on page 61).
Mute: Press to mute the audio.
Volume Up/Down: Press the Up and Down arrow buttons to adjust the volume up/down.
Power On/Off: Press to toggle the Source device Off/On, in this Zone only. The source device
will continue playback in other Zones.
Display window
Seek Up/Down
Toggle Stereo/Mono
Toggle AM/FM
Numeric keypad for direct tuning
(press Enter to select
Mute
Volume Up
Volume Down
Tuner Presets 1-10
(current frequency/band)
Source On/Off (this Zone only)
specified station)
Comments to this Manuals