AMX MET-7 Specifications download pdf (Page 45)

Basic Keypad Functions - DAS-MET-6SRC

Metreau Keypads

DAS-MET-6SRC - Audio Adjustment Mode

On a 6-source keypad, press and hold the bottom two Source buttons simultaneously for four seconds to set or

adjust Bass, Treble, Balance and SRS Mode settings in that room/zone.

Adjusting Bass Level For a Room/Zone

When the bottom two Source buttons are pressed simultaneously for four seconds, the first adjustment is for

Bass Level:

The top-left LED will blink to indicate that Bass Level Adjustment mode is active (FIG. 37).

Rotate the Navigation Wheel to adjust the bass level up (clockwise) or down (counter-clockwise).

The bass level is indicated in the LED display: Flat = center LED (#4) lit.

Press and hold the center (Select) pushbutton on the Navigation Wheel for 3 seconds to return to the

default Bass Level setting.

Press the center (Select) pushbutton on the Navigation Wheel to set the current bass level, and proceed to

Treble Adjustment mode.

Adjusting Treble Level For a Room/Zone

When the Bass Level is set (via the Select button - see above), the next adjustment is for Treble Level:

The top-right LED will blink to indicate that Treble Adjustment mode is active (FIG. 38).

Rotate the Navigation Wheel to adjust the treble level up (clockwise) or down (counter-clockwise).

FIG. 36 DAS-MET-6SRC

FIG. 37 Bass Level Adjust Mode

Press bottom two buttons

simultaneously for 4

seconds to enter Audio

Adjustment Mode

Rotate wheel to adjust

the currently selected

Current level setting

indicated by LEDs

1 - Bass Level adjust

2 - Treble Level adjust

3 - Balance adjust

4 - SRS Settings

Press center (Select) button

to accept changes

audio mode

Top-left LED blinks to indicate

Bass Level Adjust mode

Center LED (LED #4) indicates FLAT

Bass adjustments are provided in +/- 1dB steps, from -10dB (min) to +10dB (max).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 85 86

No comments

AMX MET-7 Specifications Page 45