Mounting and Installation
MET-13, DAS-MET-NUM
FIG. 17 provides detailed dimensions for the MET-13 and DAS-MET-NUM keypads.
Mounting Procedures
AMX recommends mounting Metreau keypads in standard U.S.-style decora wallboxes:
Conduit box should meet NEC specs (section 370)
Minimum internal clearance of (HWD) 2-5/8" x 1-3/4" x 1-5/8".
Wallbox Mounting
1.
Use the cutout dimension for the wallbox to cutout the install surface.
2. Connect the AxLink connector (or SWT cable connectors) to the rear of the keypad.
3. Place the Mounting Plate on the wallbox; align the screw holes with the mounting holes and fasten the
Mounting Plate to the wallbox using the screws supplied.
FIG. 17 MET-13 and DAS-MET-NUM Mounting Dimensions
Do not overtighten the screws when mounting the Mounting Frame. The device
should be flush with mounting surface.
Comments to this Manuals