AMX MVP-5150 Specifications Page 18
- Page / 190
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Introduction
6
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Product Specifications
The MVP-5100 differs from the MVP-5150 in that it does not have a built-in wireless
card or the capacity to install one, and only communicates with other devices via IR.
Otherwise, the two devices are identical.
MVP-5100 Specifications (FG5966-08)
Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
Weight: • 1.25 lbs (0.57 kg)
Enclosure: Matte black plastic.
Power Requirements
(Without Charging):
Panel with battery fully charged:
• Constant current draw: 0.3 A @ 12 VDC
• Startup current draw: 0.4 A @ 12 VDC
Power Requirements
(While Charging):
Panel while charging battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.3 A @ 12 VDC
Minimum Power Supply
Required:
• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
shipped with this power supply
Power Modes: • AWAKE: All necessary modules are powered up and device remains online
with the NetLinx Master.
• SLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the On Mode in ~ 1 second upon a
momentary press of the touchscreen.
• STANDBY: Power to all components other than the touch screen is turned off
after the user selectable time of inactivity has elapsed. Device will turn back
on by touching the screen. Re-acquiring an AP connection may require up to
10 seconds.
• SHUTDOWN: Power to all peripherals and components is turned off. The
system remains in this mode until it is rebooted. The panel is re-activated by
pressing the touchscreen and holding until the AMX splash screen appears.
Battery Duration: • 18 hours of normal use, in a combination of On, Sleep, and Shutdown
Modes.
• Ten hours of continuous use (continuous On state).
Certifications: • IEC60950
•RoHS
• TELEC
• Lithium polymer microbattery: UN/IATA
Memory: • 128 MB Mobile DDRAM (upgrade not available)
• 256 MB NAND Flash (upgrade not available)
- MVP-5100/5150 1
- Document Name Here 10
- Table of Contents 10
- Document Name Here 11
- Introduction 13
- Product Specifications 14
- TFT Color Active-Matrix 15
- Common Application 17
- Features 17
- USB Connector Location 19
- Basic Operation 20
- Audio/Video Capabilities 20
- Accessories 23
- Wall Charging Station 25
- Unlocking the touch panel 26
- Recharging 27
- Installing the MVP-WCS-52 28
- MVP- WCS-52 - Rear 30
- Installation of MVP-WCS-52 31
- Configuring Communication 35
- FIG. 12 Setup page 36
- FIG. 13 Protected Setup page 36
- 5150 Only) 38
- Using the Site Survey Tool 40
- Wireless Site Survey page 43
- Wireless Security page 44
- WEP Key # Keyboard 45
- USB Port on the MVP-5100/5150 46
- 8. Click Next 47
- 5. In the new window: 49
- TPDesign4 file 50
- Connection Modes 52
- Master within NetLinx Studio 53
- Setup Pages 55
- Navigation Buttons 56
- Project Information Page 57
- Panel Information Page 59
- Time & Date Setup Page 61
- Audio Settings Page 62
- Power Management Page 63
- Power Management Page (Cont.) 64
- Protected Setup Page (Cont.) 66
- System Settings Page 70
- Wireless Settings Page 72
- Wireless Security 73
- Security Modes 74
- Open Settings 75
- WEP Settings 75
- WPA-PSK Settings 76
- EAP-LEAP 79
- EAP-FAST 81
- EAP-FAST Settings (Cont.) 82
- EAP-PEAP 83
- EAP-PEAP Settings (Cont.) 84
- EAP-TTLS Settings 85
- EAP-TTLS Settings (Cont.) 86
- EAP-TLS Settings 87
- EAP-TLS Settings (Cont.) 88
- Calibrate Page 90
- FIG. 56 Calibrate page 90
- G4 Web Control Page 91
- G4 Web Control Page (Cont.) 92
- Other Settings 93
- Cache Settings Page 94
- Password Settings Page 95
- Panel Connection Logs Page 97
- Panel Statistics Page 98
- Connection Utility Page 99
- Protected Setup Pages 100
- Upgrading Firmware 101
- USB icon 103
- 1. Launch NetLinx Studio 108
- FIG. 76 Enter DPS window 109
- Database window (FIG. 83) 113
- Programming 115
- Page Commands (Cont.) 116
- Programming Numbers 121
- Index No. Name Red Green Blue 122
- Font Styles and ID Numbers 123
- TPD4 Border Styles by Name 124
- "^" Button Commands 125
- MVP Strings to Master 143
- Text Effects 144
- Custom Event Fields 145
- Button Query Commands 145
- Button Query Commands (Cont.) 146
- Input Commands 157
- Embedded Codes 158
- Panel Setup Commands 159
- Battery Life and Replacement 161
- IMPORTANT NOTES! 162
- Power Management 162
- Proper Battery Maintenance 162
- Battery Connector 164
- Back plate 165
- Battery screws 165
- MVP-BP-51H battery placement 166
- Excess battery wiring path 166
- Appendix A: Text Formatting 169
- Input mask character types 170
- Input mask output examples 172
- Special Escape Sequences 172
- Escape Sequences 173
- Complex Script Support 174
- Terminology 178
- FIG. 91 WPA Overview 179
- FIG. 92 WPA2 Overview 179
- EAP Characteristics 180
- Uploading a Certificate File 182
- Appendix C: Troubleshooting 185
- 3. Reboot the device 187
- Appendix 189
Related products and manuals for Remote controls AMX MVP-5150
Remote controls AMX MET-7 Specifications
(86 pages)
(86 pages)
Remote controls AMX CP-2012 Manual
(1 pages)
(1 pages)
Remote controls AMX MET-7 Specifications
(84 pages)
(84 pages)
Remote controls AMX DAS-DI-0406 User Manual
(17 pages)
(17 pages)
Remote controls AMX NXD-CV5 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.529 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals