AMX MVP-5150 Specifications Page 101
- Page / 190
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Upgrading Firmware
89
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels
Upgrading Firmware
The MVP-5100 and MVP-5150 come already loaded with on-board firmware, which is upgradeable
through the use of the latest version of NetLinx Studio. Refer to the NetLinx Studio version 2.x or higher
Instruction Manual for more information on how to download firmware to a touch panel.
Both the MVP-5100 and MVP-5150 use a native RNDIS USB driver for USB-over-Ethernet
communication. When the device is connected to the downloading computer (see instructions below for
more details), it creates a new LAN connection, and the user will need to supply a static IP address for
this to be enabled. To enter a static IP address, the user must edit the properties of the TCP/IP interface of
the connection itself. This driver is included in the latest version of NetLinx Studio, available from
www.amx.com.
Upgrading the Modero Firmware via the USB port
The MVP-5100 and MVP-5150 use a 5-pin CC-USB (Type A) to Mini-B 5-Wire programming cable
(FG10-5965) for programming, firmware updates, and touch panel file transfer between the PC and the
target device. If a programming cable is not available, it may be purchased from www.amx.com. The
Mini-USB port for the connector is located on the left side of the device as viewed from the front.
Before beginning with this section, verify that the device is powered and the Type-A end of the USB
connector is inserted and secure in the PC’s USB port. The panel must be powered On before
connecting the mini-USB connector to the panel. To guarantee that the upgrade is not interrupted by
power loss, connecting the device to a power source, such as inserting it into a Table Charging Station,
before beginning the upgrade is highly recommended.
1. Launch NetLinx Studio and select Settings > Master Communication Settings from the Main
menu to open the Master Communication Settings dialog (FIG. 64).
Programming the MVP-5100 and MVP-5150 require the use of the latest versions of
NetLinx Studio and TPDesign 4, both available from www.amx.com.
Establishing a USB connection between the PC and the panel, prior to installing the
USB Driver, will cause a failure in the USB driver installation.
FIG. 64 Master Communications Settings dialog box
- MVP-5100/5150 1
- Document Name Here 10
- Table of Contents 10
- Document Name Here 11
- Introduction 13
- Product Specifications 14
- TFT Color Active-Matrix 15
- Common Application 17
- Features 17
- USB Connector Location 19
- Basic Operation 20
- Audio/Video Capabilities 20
- Accessories 23
- Wall Charging Station 25
- Unlocking the touch panel 26
- Recharging 27
- Installing the MVP-WCS-52 28
- MVP- WCS-52 - Rear 30
- Installation of MVP-WCS-52 31
- Configuring Communication 35
- FIG. 12 Setup page 36
- FIG. 13 Protected Setup page 36
- 5150 Only) 38
- Using the Site Survey Tool 40
- Wireless Site Survey page 43
- Wireless Security page 44
- WEP Key # Keyboard 45
- USB Port on the MVP-5100/5150 46
- 8. Click Next 47
- 5. In the new window: 49
- TPDesign4 file 50
- Connection Modes 52
- Master within NetLinx Studio 53
- Setup Pages 55
- Navigation Buttons 56
- Project Information Page 57
- Panel Information Page 59
- Time & Date Setup Page 61
- Audio Settings Page 62
- Power Management Page 63
- Power Management Page (Cont.) 64
- Protected Setup Page (Cont.) 66
- System Settings Page 70
- Wireless Settings Page 72
- Wireless Security 73
- Security Modes 74
- Open Settings 75
- WEP Settings 75
- WPA-PSK Settings 76
- EAP-LEAP 79
- EAP-FAST 81
- EAP-FAST Settings (Cont.) 82
- EAP-PEAP 83
- EAP-PEAP Settings (Cont.) 84
- EAP-TTLS Settings 85
- EAP-TTLS Settings (Cont.) 86
- EAP-TLS Settings 87
- EAP-TLS Settings (Cont.) 88
- Calibrate Page 90
- FIG. 56 Calibrate page 90
- G4 Web Control Page 91
- G4 Web Control Page (Cont.) 92
- Other Settings 93
- Cache Settings Page 94
- Password Settings Page 95
- Panel Connection Logs Page 97
- Panel Statistics Page 98
- Connection Utility Page 99
- Protected Setup Pages 100
- Upgrading Firmware 101
- USB icon 103
- 1. Launch NetLinx Studio 108
- FIG. 76 Enter DPS window 109
- Database window (FIG. 83) 113
- Programming 115
- Page Commands (Cont.) 116
- Programming Numbers 121
- Index No. Name Red Green Blue 122
- Font Styles and ID Numbers 123
- TPD4 Border Styles by Name 124
- "^" Button Commands 125
- MVP Strings to Master 143
- Text Effects 144
- Custom Event Fields 145
- Button Query Commands 145
- Button Query Commands (Cont.) 146
- Input Commands 157
- Embedded Codes 158
- Panel Setup Commands 159
- Battery Life and Replacement 161
- IMPORTANT NOTES! 162
- Power Management 162
- Proper Battery Maintenance 162
- Battery Connector 164
- Back plate 165
- Battery screws 165
- MVP-BP-51H battery placement 166
- Excess battery wiring path 166
- Appendix A: Text Formatting 169
- Input mask character types 170
- Input mask output examples 172
- Special Escape Sequences 172
- Escape Sequences 173
- Complex Script Support 174
- Terminology 178
- FIG. 91 WPA Overview 179
- FIG. 92 WPA2 Overview 179
- EAP Characteristics 180
- Uploading a Certificate File 182
- Appendix C: Troubleshooting 185
- 3. Reboot the device 187
- Appendix 189
Related products and manuals for Remote controls AMX MVP-5150
Remote controls AMX MET-7 Specifications
(86 pages)
(86 pages)
Remote controls AMX CP-2012 Manual
(1 pages)
(1 pages)
Remote controls AMX MET-7 Specifications
(84 pages)
(84 pages)
Remote controls AMX DAS-DI-0406 User Manual
(17 pages)
(17 pages)
Remote controls AMX NXD-CV5 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 3.010 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals