Amx MIO-R1-AUDIO User Manual download pdf (Page 2)

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

2/08

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-0147-04 REV: A

Note: While in each of the modes, press and hold the Center NAV button to return to

the default for that mode.

SRS (Bass Boost, Focus, 3D and WOW) Settings

Use the UP Nav button to cycle through the SRS Settings: BASS Boost, Focus, 3D,

WOW (in that order).

Use the Down NAV button to cycle backwards to the previous SRS setting.

• Press and hold the Center NAV button to disengage/clear the SRS settings

(none of the SRS modes will be engaged).

• Press the Center NAV button to save SRS Mode & exit from Tone Control

set-up.

Only one SRS mode can be engaged per room/zone. Each room/zone, however,

can have a different SRS mode.

The Volume LED's are used to provide feedback as to which SRS setting is active:

•No LED = SRS Off

• LED1 = BASS boost

• LED 1&2 =Focus

• LED 1,2&3 =3D

• LED 1,2,3&4 =WOW

Moving from one SRS position to another disengages the original setting i.e. moving

from WOW to BASS BOOST, disengages WOW.

Zone Control

• To turn a single Zone ON, press any Source button (or press the Power

Button).

Note: If the Power button is pressed, the zone will turn ON and will remember

which source was previously ON.

• To turn a single Zone OFF, press the Power button.

• To turn a specific Source ON in all Zones, press and hold any Source button

(the selected source will turn on and play in all zones).

• To turn a specific Source OFF in all Zones, press and hold the active Source

button.

• To Turn All Zones OFF (System OFF), Press the "OFF" button. All zones will

be turned off, and no sources will play.

Note: One minute after an ALL OFF has been performed, the Controller and all

Sources will be powered down

Note: Pressing Source Buttons switches between sources and turns the

Source On, but does not toggle between ON and OFF.

Source Control

The source control functionality outlined below represents "suggested" functions. All

source control buttons (Up, Down, Left, Right, Center and Center HOLD) can be

customized via the Controller Menu for all sources except for the Internal Tuner,

which cannot be customized.

Internal Tuner and Audio Server

CD and DVD

Satellite and Other

Custom XM

Direct Numeric Access

Tuners

Enter the station identification and press ENTER.

• Strings of 3 to 4 numbers are recognized.

• If a " • " (dot) is part of the string, then an FM station is assumed, otherwise an

AM station is assumed.

Example: 1050 + ENTER= 1050AM, 104 • 5 + ENTER = 104.5FM

CD Player / Changer

To select a specific Disc & Track, the format is DDD • TTT + ENTER

(DDD=Disc, TTT=Track).

Example: 11.11 + ENTER = Disc 11, Track 11

To select a specific track on the current disk, enter TTT + ENTER (TTT=Track).

Example: 3 + ENTER = current disk, Track 3

Satellite Radio/Video

Enter the station number and press ENTER. Strings of 2 - 4 numbers are recognized.

Configuration Mode

The configuration mode allows you to set various device features (IR Transmit Mode,

Timeout Adjustment, Download Mode, Debug Mode, Battery Type, LED Awake

Brightness, and LED Sleep Brightness.

To enter Configuration Mode:

1. Press and hold button #38 and the "." (dot) or button #26 (see FIG. 1). Both

buttons must be pressed within 0.1 seconds of each other and held down for 2

seconds. The device indicates you are now in configuration mode.

2. Press button #3 (FAV) when you are finished.

Note: Your settings will not be lost in the event your batteries die or are removed.

IR Transmit Mode

Note: Metreau MET-6N keypads support 38KHz only. The MIO R-1 AUDIO must be

set to 38KHz if used with MET-6N keypads.

Pressing button 1 toggles the IR transmission mode between 38KHz (default) and

455KHz. The display indicates the current mode.

Timeout Adjustment

Press button 2 to change the sleep timeout from the default. Each time "2" is

pressed, the sleep timeout raises incrementally. The pre-determined sleep timeouts

are:3 seconds, 6 seconds, 9 seconds, and 12 seconds. The display indicates the

selected sleep timeout.

Download Mode

Pressing button 3 toggles the Download mode OFF and ON. The Download mode

must be ON before you can download a file to the MIO R-1 AUDIO device. While the

Download mode is ON the device will not go to sleep. A power cycle will return the

device to Download OFF.

Debug Mode

Pressing button 4 toggles development mode between ON and OFF. The display

indicates the selected mode. In development mode, the display shows the IR code

assigned to buttons when pressed.

This mode is useful to the programmer when determining what IR codes are

associated to each mode.

Battery Type

Pressing button 6 toggles the battery type between Normal and Recharge. The

display indicates the selected type. The type of battery in the MIO R-1 AUDIO

dictates the battery type you need to set.

LED Awake Brightness

Pressing button 7 toggles the Power LED brightness mode from LOW to MED and

then HIGH. The display indicates the selected mode.

LED Sleep Mode Brightness

Pressing button 8 toggles the Sleep brightness mode from OFF to LOW and then

MED. The Sleep brightness is the state the MIO R-1 AUDIO assumes while in the

charging cradle.

Additional Documentation

Refer to the MIO R-1 AUDIO Remote Operation/Reference Guide for additional

information on MIO R-1 AUDIO functionality, including: Privacy Mode, Presets, Zone

Grouping, Favorites, Alarm, and Keypad Lockout.

NAV Button Internal Tuner AUDIO SERVER

NAV Up

SEEK UP NEXT

NAV Down

SEEK DOWN PREVIOUS

NAV Left

Prev PRESET Prev PAGE

NAV Right

Next PRESET Next PAGE

NAV Center (press)

AM/FM SELECT

NAV Center (press/hold)

Stereo/Mono User Defined 1

NAV Button CD DVD

NAV Up

Next TRACK UP

NAV Down

Prev TRACK DOWN

NAV Left

Prev DISC LEFT

NAV Right

Next DISC Right

NAV Center (press)

User Defined1 Select

NAV Center (press/hold)

User Defined2 Menu

NAV Button External Satellite Other

NAV Up

Next Channel User Def UP

NAV Down

Prev Channel User Def DOWN

NAV Left

Guide Down User Def LEFT

NAV Right

Guide UP User Def RIGHT

NAV Center (press)

Select User Def SELECT

NAV Center (press/hold)

Guide User Def HOLD SELECT

NAV Button CUSTOM XM

NAV Up

NAV Down

DOWN

NAV Left

LEFT

NAV Right

RIGHT

NAV Center (press)

CENTER

NAV Center (press/hold)

CEN hold

1 2

Comments to this Manuals

No comments

Amx MIO-R1-AUDIO User Manual Page 2

Comments to this Manuals

Related products and manuals for Remote control Amx MIO-R1-AUDIO