AMX EXB-COM2 Specifications download pdf (Page 29)

EXB-I/O8

ICSLan Device Control Boxes

EXB-I/O8

Overview

The EXB-I/O8 Networked 8-I/O Device (FG2100-21) provides eight Input/Output channels with LED

feedback. It acts as a logic-level input and responds to switch closures or voltage level (high/ low) changes.

EXB-I/O8 Product Specifications

In addition to the features described in the ICSLan Device Control Boxes - Common Features table on page 2,

the components and specifications listed below are specific to the EXB-I/O8 module:

FIG. 7 EXB-I/O8

(front)

(rear)

I/O (1-8) LEDs

I/O CHANNELs 1-8

LINK/ACT LED

STATUS LED

ID Pushbutton

Ethernet Port (RJ-45)

The I/Os on this Module are not dry closure; they are electronic switches that float at

3V when Off. Therefore, they should not be expected to work in situations that require

true dry contact (or dry closure). The I/Os do work with AMX PC1, PC2, UPC20 and

UPC20+.

EXB-I/O8 Specifications

Power Requirements

PoE (Power-over-Ethernet)

Power Draw • Idle (min): 30mA 1.44 watts

• Busy (max): 40mA 1.92 watts

Front Panel Components

I/O LEDs (1-8) 8 (yellow) LEDs light to indicate activity on I/O channels 1-8.

Note: Active = output high.

Rear Panel Components

I/O Ports (1-8) Connector: 3.5mm Phoenix – 10-positions

This connector is designated as Port 1, Channels 1-8

Included Accessories • 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)

Other AMX Equipment • NXA-ENET8POE Gigabit Ethernet Switch (FG2178-62)

• PS-POE-AF PoE Injector (FG423-80)

• AVB-VSTYLE-SURFACE-MNT V-Style Module Surface Mount (FG1010-722)

• AVB-VSTYLE-RMK-1U V-Style Module Tray (FG1010-720)

• AVB-VSTYLE-RMK-FILL-1U V-Style Module Tray w/ fill plates (FG1010-721)

• AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 69 70

No comments

AMX EXB-COM2 Specifications Page 29