Amx ViewStat User Manual download pdf (Page 64)

Operating the Thermostat

ViewStat Communicating Thermostat

Fan button

The fan can be operated continuously (FAN ON) or only when there is a need to heat or cool.

Enter button

The Enter (or Network Override) button is used to override the home automation system, to clear temporary

flashing messages on the message display and with the set-up features of the thermostat.

Main display

The Main display (FIG. 41) provides the mode status, temperature and system status information.

The following table describes the items on the Main display:

FIG. 41 Main Display window

Main Display

MODE STATUS Shows the current mode of operation: OFF, COOL, HEAT or COOL, EM. HEAT

(for heat pumps only), and HEAT. The current mode will flash to show when the

equipment is running.

SET POINTS Shows the Heating and/or Cooling temperature settings.

FAN STATUS FAN ON indicates the fan is set to operate continuously.

LOCKOUT The lockout setting shows the thermostat buttons have been locked out and the

thermostat settings can not be changed at the thermostat.

ROOM TEMPERATURE Shows the current room temperature. The temperature can be displayed in °F or

°C. This would show relative humidity (%) if the thermostat has been installed

with an optional humidity control sensor.

REMOTE TEMPERATURE/

RELATIVE HUMIDITY

A temperature and/or a relative humidity value will be displayed alternately here

when an optional remote temperature and/or humidity sensor has been installed

(typical use is for outdoor temperature).

NETWORK OVERRIDE When NETWORK OVERRIDE is displayed, the thermostat has been taken off-

line from the system. The thermostat can then only be operated at the

thermostat.

NETWORK STATUS This computer icon shows the thermostat is connected to the system. The icon

will flash when the thermostat sends or receives information. If there is no

activity on the system for 15 minutes the icon will be crossed out. This does not

mean the thermostat is unable to communicate, only that there has been no

communication to this thermostat in 15 minutes.

Network Status

Lockout

Fan Status

Set Points

Mode Status

Network Override

Remote Temperature/

Relative Humidity

Room Temperature/

Relative Humidity

1 ... 63 64 65 66 67 68

Comments to this Manuals

No comments

Amx ViewStat User Manual Page 64

Comments to this Manuals