Amx Modero NXD-CV5 User Manual download pdf (Page 43)

Configuring Communication

NXD-CV5 5" Modero Wall/Flush Mount Touch Panel

Configuring Communication

Overview

Communication between the Modero panel and the Master is done using either USB or ETHERNET (DHCP

or Static IP). Ethernet communication can only be achieved via a direct Ethernet connection (the NXA-

WC802.11B/CF wireless interface card is not available on the CV5).

Modero Setup and System Connection

1. Press the grey Front Setup Access button for 3 seconds to open the Setup page (FIG. 29).

2. Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected Setup

page and display an on-screen keypad.

3. Enter 1988 into the Keypad’s password field and press Done when finished.

4. Press the red Device Number field to open the Device Number keypad (FIG. 30).

5. Enter a Device Number for the panel into the Device Number Keypad.

The default is 10001 and the range is from 1 - 32000.

6. Press Done to close the keypad, assign the number, and return to the Protected Setup page.

7. Press the on-screen Reboot button to restart the panel and incorporate any changes.

Before commencing, verify you are using the latest NetLinx Master and Modero panel

firmware. Verify you are using the latest versions of AMX’s NetLinx Studio and

TPDesign4 programs.

USB input devices must be plugged into the rear or side USB connectors before the

G4 panel is powered-up. The panel will not detect a USB connection of this type until

after the unit cycles power.

FIG. 29 Setup page

Connection Status

Red Connection Status icon -

Green Connection Status icon -

indicates no connection

indicates communication

to a Master

Clearing Password #5, from the initial Password Setup page, removes the need for

you to enter the default password before accessing the Protected Setup page.

When using multiple panels within a NetLinx System, remember to assign unique

Device Number values to each panel so that all assigned panels appear in the

System listing for the target Master.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 151 152

No comments

Amx Modero NXD-CV5 User Manual Page 43