Amx Modero NXD-CV5 User Manual download pdf (Page 14)

Introduction

NXD-CV5 5" Modero Wall/Flush Mount Touch Panel

 CV5 panels feature programmable firmware that can be upgraded via either the Ethernet port or the

mini-USB port.

CV5 Specifications

The following table outlines the specifications for the 5" Widescreen Modero panel.

Product Specifications

Dimensions (HWD): • NXA-RK5 (optional): metal rack-mount with black matte finish:

(3 RU - rack units high)

5.22" x 19.0" x 0.50" (13.26 cm x 48.26 cm x 1.27 cm)

• NXD-CV5 (with faceplate): 4.15" x 5.59" x 3.23"

(10.50 cm x 14.20 cm x 8.20 cm)

• CB-TP5 Rough-In/Wallbox (optional): 4.27" x 5.14" x 3.40"

(10.86 cm x 13.06 cm x 8.64 cm)

Power Requirements

(stand-alone CV5):

• Constant current draw: 650 mA @ 12 VDC

• Startup current draw: 1.3 A @ 12 VDC

Memory (factory default): • 64 MB SDRAM

• 64 MB Flash Memory (not upgradeable - factory programmed)

Weight: • 1.76 lbs (0.80 kg)

Certifications: • FCC Part 15 Class B, CE, and IEC 60950

Panel LCD Parameters: • Aspect ratio: 16 x 9

• Brightness (luminance): 170 cd/m

• Channel transparency: 8-bit Alpha blending

• Contrast ratio: 250:1

• Display colors: 256 thousand colors (18-bit color depth)

• Dot/pixel pitch: 0.14 mm

• Panel type: TFT Color Active-Matrix

• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

• Video format: NTSC, MPAL, PAL, and SECAM

• Viewing dimensions: 4.3" x 2.58" (109.2 mm x 65.2 mm)

Active Screen Area: • 4.25” x 2.55” (10.80cm x 6.48cm)

Viewing Angles: • 90° total viewing angle:

- Horizontal: +

45° (left and right from center)

IR Reception Angle: • Horizontal: +

25° (left and right from center)

• Vertical: +

15° (up and down from center)

Supported Audio Sample

Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,

11025Hz, and 8000Hz.

Front Panel Components:

Light sensor: • Photosensitive light detector for automatic adjustment of the panel brightness

(a dim room results in a dimmer LCD display, and a bright room results in a

brighter LCD display).

Note: The light sensor can be adjusted via the Sensor Setup page (page 72).

Motion sensor (PIR): • Proximity Infrared Detector to wake the panel when the panel is approached.

• Activation range: +

25° (left and right from center) and + 15° (up and down

from center).

Note: This sensor can be adjusted via the Sensor Setup page (see page 72).

IR Receiver: • IR reception 38 KHz and 455 KHz IR frequencies.

• The IR receiver is located beneath the translucent Front Setup button. When

an IR code is detected it is sent to the NetLinx Master as a push on the

appropriate AMX IR channel.

• IR receivers and transmitters on G4 panels share the device address number

of the panel.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 151 152

Comments to this Manuals

No comments

Amx Modero NXD-CV5 User Manual Page 14

Comments to this Manuals

Related products and manuals for Monitors Amx Modero NXD-CV5