Amx 8-Module In-Wall Enclosure RDA-ENC8W User Manual download pdf

Installation Sheet

RDA-ENC8W 8-Module In-Wall Enclosure

The RDA-ENC8W enclosure provides secure mounting for all AMX

Lighting, PROlink controllers, and lighting modules. This in-wall enclosure

mounts between 16" centered studs and provides eight spaces for Radia

cards, Modules, and Integrated Dimming Modules.

Install only UL approved models (see the UL Number Cross Reference to

AMX Lighting ID table on page 2) except RDM-INC and RDm-INC50.

The unit supports up to 24 dimming channels per unit. This enclosure is UL

and C-UL approved.

Installation Instructions:

• For indoor use only.

• Mount on vertical surface only.

• Maintain 16" (406.40 mm) minimum clearance above and below the

enclosure.

• Route class 1 conductors through upper conduit knockouts.

• Route class 2 conductors through lower conduit knockouts.

• Use 75°C (167°F) copper conductors only.

• Supports up to 24 dimming channels per unit (4 RDD-DM6).

• Install filler plate #28-10500 (RDA-EFP) in all unused openings.

• Install only UL approved modules (see the UL Number Cross Refer-

ence to AMX Lighting ID table on page 2) except RDM-2INC and

RDM-INC50.

• Instals within 16" (406.40 mm) centered studs or surface mount.

• Inserts 3.25" (85.09 mm) into wall to hide conduit (Knockouts

included).

• Projects 4.25" (107.95 mm) away from wall for ventillation.

Enclosure Weight:

• RDA-ENC8W: 16.5 lbs. (7.48 kg)

Dimensions between center lines (from FIG. 2):

RDA-ENC8W:

• A to B = 15.25" (387.35 mm) - Surface mounting

• C to D = 6.00" (152.40 mm) - Stud mounting

• E to F = 32.5" (825.50 mm) - Surface mounting

• G to H = 28.00" (711.20 mm) - Stud mounting

Radia enclosures must be mounted on a vertical surface with a minimum of

12" (304.8 mm) clearance above and below the enclosure.

FIG. 1 Top, bottom and front views of the RDA-ENC8W enclosure

SIDE VIEW

37.3"

(947.4 mm)

(365.00 mm)

7.5"

(190.5 mm)

Top, side, and bottom

views are the same for

this enclosure.

14.37"

3.25"

(82.55 mm) - located within the wall

2.25"

(57.15 mm)

(387.35 mm)

15.25"

(with case cover)

BOTTOM VIEW

(without case cover)

Metallic stud

mounting flap

BOTTOM VIEW

(with case cover)

32.5"

(825.5 mm)

FIG. 2 Bracket configuration

A to B

E to F

Bottom slot

Top slot

Configuration for

right and left

mounting brackets

for all Radia

enclosures.

Maximum mounting

screw size: #12

C to D

G to H

1 2

Installation Sheet 1

Summary of Contents

Page 1 - Installation Sheet

Installation SheetRDA-ENC8W 8-Module In-Wall EnclosureThe RDA-ENC8W enclosure provides secure mounting for all AMX Lighting, PROlink controllers, and

Page 2

AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Man

Comments to this Manuals

No comments

Amx 8-Module In-Wall Enclosure RDA-ENC8W User Manual

Browse online or download User Manual for Hardware Amx 8-Module In-Wall Enclosure RDA-ENC8W. AMX 8-Module In-Wall Enclosure RDA-ENC8W User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Amx 8-Module In-Wall Enclosure RDA-ENC8W