instruction manualAXlink Bus ControllersAXB-232++RS-232/422/485 Interface
Installation and Wiring6AXB-232++ RS-232/422/485 InterfaceWiring Devices to the AXB-232++Preparing captive wiresTo connect the wiring into a captive-w
Installation and Wiring7AXB-232++ RS-232/422/485 InterfaceUsing RS-232When communicating via RS-232, connect the wiring as shown in FIG. 6.Using Hardw
Installation and Wiring8AXB-232++ RS-232/422/485 InterfaceRack-mounting the AXB-232++ (optional)To rack-mount the AXB-232++ into the optional AC-RK Ac
Programming9 AXB-232++ RS-232/422/485 InterfaceProgrammingSend_CommandsThe AXB-232++ supports the same command set as the AXC-232. The following table
Programming10AXB-232++ RS-232/422/485 InterfaceAXB-232++ Send_Commands (Cont.)CHARDSets delay between all transmitted characters to the increment spec
Programming11 AXB-232++ RS-232/422/485 InterfaceAxcess program characteristicsThe AXB-232++ is capable of running Axcess programs. It handles string p
Programming12AXB-232++ RS-232/422/485 InterfaceSend_String Escape SequencesThe AXB-232++ does not regard certain three-character combinations within a
Programming13 AXB-232++ RS-232/422/485 InterfaceAXB-232++ Program StatementsThe Axcess program of the AXB-232++ communicates with the master as Device
Programming14AXB-232++ RS-232/422/485 InterfaceXmodem Timing CommandsThe following table lists the AXB-232++ Xmodem timing commands. Xmodem timeouts e
Programming15 AXB-232++ RS-232/422/485 InterfaceReserved ChannelsThe following table lists the channels reserved on Device 0.Axcess Master ModeWhen an
AMX reserves the right to alter specifications without notice at any time.032-004-1718 9/05 ©2005 AMX Corporation. All rights reserved. AMX, the AMX
Table of ContentsiAXB-232++ RS-232/422/485 InterfaceTable of ContentsProduct Information ...
iiAXB-232++ RS-232/422/485 InterfaceTable of Contents
Product Information1 AXB-232++ RS-232/422/485 InterfaceProduct InformationThe AXB-232++ RS-232/422/485 Interface is an AXlink bus controller that prov
Product Information2AXB-232++ RS-232/422/485 InterfaceSpecificationsThe following table lists the specifications for the AXB-232++.SpecificationsPower
Installation and Wiring3AXB-232++ RS-232/422/485 InterfaceInstallation and WiringThe AXB-232++ can be used as an independent RS-232/422/485-controlled
Installation and Wiring4AXB-232++ RS-232/422/485 InterfaceSetting jumper JP5 to set the RS-422 port for RS-485 use1. Disconnect the RS-232/422/485 con
Installation and Wiring5AXB-232++ RS-232/422/485 InterfaceSetting the RS-232/422 DIP switchSet the stop bits, data bits, parity, and baud rate on the
Comments to this Manuals