AMX DESIGN XPRESS-PROFESSIONAL V 1.1 - PROGRAMMER GUIDE User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
General Information
350-11219-01 v1.0 Linx Matrix Switcher Programmer’s Guide for AMX Controllers 6
RGB
Supported Linx Matrix Switchers: Linx DVI 800/1600/3200
Linx CrossXFormat 900/1700/3400
Linx Prime 1000/1800/3400
RGB Linx Firmware: Version 4.1 or higher recommended
Summary: Controls the RGB Spectrum – Linx Switcher family via RS-232
or Ethernet control.
AMX Hardware Required: AMX Netlinx Processors
AMX Firmware: Tested with version 3.60.453
RS-232 Settings: Baud: 9600 (Linx default)
Parity: None
Data Bits: 8
Stop Bits: 1
Hardware Control: OFF
All connectors on the Linx switchers are on the back panel. The positions of connectors will vary by
model. Figure 1
illustrates the rear panel of the Linx Prime 1800.
Figure 1 Linx Prime 1800 Rear Panel
1. General Information
Note
The FReeZe (FRZ) command for Scaler card output is handled in reverse order in
firmware releases up to 4.0.5. This means the FRZ OFF command causes the
freeze to become active. The FRZ ON command causes the frozen image to
become unfrozen.
Beginning with firmware version 4.1 the FRZ ON command causes the image to
freeze and the FRZ OFF command causes the frozen image to become unfrozen.
2. Connections
I
110-240 VAC
6A 50/60 Hz
AC Power
1
24681012 24681012
35791113 13579111315
INPUT MODULE S OUTPUT MODULES
CONTROL
DVI Out
power ready
dvi active
dvi acti ve
DVI Out
power ready
dvi active
dvi acti ve
DVI Out
power ready
dvi active
dvi acti ve
DVI Out
power ready
dvi active
dvi acti ve
DVI Out
power ready
dvi active
dvi acti ve
DVI Out
power ready
dvi active
dvi acti ve
rfd
rst
power
ready
100/1000 BASE-TRS-232 Serial
CPU
DVI In
power
ready
dvi active
dvi active
DVI In
power
ready
dvi active
dvi active
DVI In
power
ready
dvi active
dvi active
DVI In
power
ready
dvi active
dvi active
15
FiberDVI In
power ready
lin k status l ink stat us
FiberDVI In
power ready
link status link status
FiberDVI Out
power ready
link sta tus
lin k status
FiberDVI Out
power ready
link sta tus
lin k status
14 16 14 16
HD/3G-SDI In
power ready
active active
HD/3G-SDI In
power ready
active active
Inputs
Outputs
Ethernet
RS-232
Power Switch
Page view 5
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments