Amx Mio Modero R-2 User Manual download pdf (Page 18)

Programming The Mio R-2

Mio Modero R-2

Persistent Serial Commands

There are a select number of persistent commands the Mio R-2 recognizes. Establish a HyperTerminal

session with your device to use the following commands:

Serial Commands

@BRT Set Brightness level

Syntax:

"'BRIT-<awake brightness level>,<sleep brightness

level>'"

Variables:

brightness level # = a value from 0 - 32.

"'@BRT-#'" (Set LED Awake brightness level)

"'@BRT-#,#'" (Set LED Awake brightness level, sleep brightness level)

Example:

(1) "'@BRT-16'"

Sets the awake brightness level to 50%.

(2) "'@BRT-32,5'"

Sets the awake brightness level to 100% and sleep brightness level to

approximately 15%

IRMODE # Sets the IR transmission frequency to either 455KHz or 38KHz.

Syntax:

"IRMODE #"

Variables:

# = 455 or 38

Example:

"IRMODE 455"

Sets the IR transmission frequency to 455KHz.

SLEEP-# Force the device into screen saver mode.

Syntax:

"'SLEEP-#'" (timed sleep; a persistent command)

Variables:

# = 0 - 60 in seconds; time to wait before going to sleep. Default is 30. 0 sets

the device to never sleep.

Example:

SEND_COMMAND Panel,"'SLEEP-45'"

Forces the device into screen saver mode after 45 seconds.

1 ... 17 18 19 20 21 22 23 24

No comments

Amx Mio Modero R-2 User Manual Page 18