AMX RDC-DC User Manual download pdf (Page 2)

AMX Corporation reserves the right to alter specifications without notice at any time.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

The AMX logo is a trademark of AMX Corporation. AMX Corporation reserves the right to alter specifications without notice at any time.

3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993

Setting AXlink and PROlink Address Numbers:

Lighting Application Drawing

Dry Closure Default Presets

Contact Closure Default Function

1 Channel 1 at 100% in 1 second

2 Channel 2 at 100% in 1 second

3 Channel 3 at 100% in 1 second

4 Channel 4 at 100% in 1 second

5 Channel 5 at 100% in 1 second

6 Channel 6 at 100% in 1 second

7 Pack on (channels 1-6)

8 Pack off (channels 1-6

All other channels are undefined.

FIG. 6 Setting AXlink and PROlink address numbers.

AXlink Address PROlink Address

Te s t

Set the AXlink address number

(1-255) for the RDC-DC. This

number must match the device

number in your Axcess program.

Use the PROlink DIP switch to set

the PROlink address number for the

RDC-DC (1-10).

Pin 8 on the PROlink DIP switch is

a test switch that turns all circuits on

to full.

RDC-DC/120

Panel

All neutrals are common to the Neutral

block in the enclosure. Provide a separate

neutral for each load.

1 2

No comments

AMX RDC-DC User Manual Page 2