AMX DXLink Instruction Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
Installation and Setup
41
Instruction Manual – DXLink Fiber Transmitters and Receivers
Options for System Setup with Enova DGX – DXLink Fiber Boards
The following table contains options for using DXLink Fiber Transmitters and Receivers in conjunction with DXLink
Fiber Input and Output Boards in an Enova DGX Digital Media Switcher. The TX/RX units and input/output boards can
be either Simplex or Duplex, as long as the model types match (multimode to multimode and single mode to single
mode).
Functions of DXLink Fiber Transmitters and Receivers
The diagram in FIG. 10 below shows the functions of DXLink Fiber Transmitters and Receivers. The example
descriptions contain the device’s HDCP key count when used in conjunction with DXLink Fiber Boards in an Enova
DGX Digital Media Switcher.
Important: (Applies to Duplex and Simplex) The DXLink Fiber TX and the DXLink Fiber Input Board must
have the same type of fiber optic transceiver. The DXLink Fiber Output Board and the DXLink Fiber RX must
have the same type of fiber optic transceiver. The multimode and single mode fiber optic transceivers allow
for in-the-field replacement and can even be swapped as long as these constraints are followed.
System Setup Options - Enova DGX DXLink Fiber Boards with DXLink Fiber TXs and RXs
DXLink Fiber TX Enova DGX Input Board Enova DGX Output Board DXLink Fiber RX
Single Mode TX DXLink Fiber SM Input Board DXLink Fiber SM Output Board Single Mode RX
Single Mode TX DXLink Fiber SM Input Board DXLink Fiber MM Output Board Multimode RX
Single Mode TX DXLink Fiber SM Input Board Any board Not applicable
Multimode TX DXLink Fiber MM Input Board DXLink Fiber MM Output Board Multimode RX
Multimode TX DXLink Fiber MM Input Board DXLink Fiber SM Output Board Single Mode RX
Multimode TX DXLink Fiber MM Input Board Any board Not applicable
Not applicable Any board DXLink Fiber SM Output Board Single Mode RX
Not applicable Any board DXLink Fiber MM Output Board Multimode RX
FIG. 10
The repeater and source functions of DXLink Fiber Transmitters and Receivers
Fiber optic cable
Fiber optic cable
Fiber optic cable
Destination
Destination
Destination
Source
Source
Source
HDMI
cable
HDMI cable
HDMI
cable
HDMI cable
HDMI
cable
HDMI
cable
Fiber optic cable
Switcher
Switcher
Switcher
TX acts like a sink
TX acts like a sink
RX acts like a source
RX acts like a source
HDMI Out
Fiber Out
Fiber OutHDMI In
Fiber In
Fiber In
Example B
Example C
Example A
Acts like
a sink
Example A: When a Receiver acts like a source, its key does not count. Source device sees 1 key (Transmitter).
Example B: When a Transmitter acts like a sink, the source device sees 1 key (Transmitter).
Example C: When a source device is connected directly to a switcher, the source sees 1 key (switcher input).
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 147 148

Comments to this Manuals

No comments